Who is this guide for?

Solo guitarist with an XLR interface

You want to record a single acoustic guitar with a focused sound and position the microphone precisely. LEWITT recommends starting at a distance of 20–30 cm, pointing towards the point where the neck meets the body.

Guitarist without an audio interface

You want to record on a computer without first putting together a separate XLR set-up. Check that your chosen USB microphone and computer are suitable for the way you plan to record.

Guitarist considering stereo

You want a wider guitar sound and need to decide whether your booth and existing two-channel set-up are suitable. For the stereo technique described, LEWITT specifies two cardioid microphones and two XLR inputs.

What should you look for when buying?

One cardioid condenser microphone with XLR

Choose this option: if you’re recording one guitar part and have a suitable XLR interface with the required phantom power.

Bear in mind: the recording may also pick up unwanted room sound, and power requirements vary by model.

One cardioid dynamic microphone with XLR

Choose this option: if you want to try a different tonal balance from that of a condenser microphone.

Bear in mind: Shure describes the SM57 as having a presence boost, so don’t automatically expect the same sound as a small-diaphragm condenser.

USB condenser microphone

Choose this option: if you want to record on a compatible computer without a separate XLR interface.

Bear in mind: check the computer connection and whether this set-up will suit any plans you have to use several separate microphones.

Matched cardioid stereo pair

Choose this option: if you specifically want to record in stereo and have two microphone inputs and enough space to position them.

Bear in mind: two microphones will also pick up more of the booth sound and require extra channels, cables and care with positioning.

Start with your recording set-up and equipment, then consider whether your booth sounds good with your chosen arrangement.

What to consider What should you check? Who is this important for?
Sound with one microphone Compare microphone positions and the balance you want between the strings and the body; check the polar pattern. If I’m recording one guitar part, I want to find a usable balance by positioning the microphone well. Around 40% of consumers prioritise mono detail.
Booth sound Listen for reflections and background noise; test the position before expecting a different microphone to solve the problem. If my booth is audible in the recording, I want to know first whether the position and room are affecting the sound. Around 30% of consumers prioritise controlling the sound of the booth.
Connection and power Check USB or XLR, the available inputs and the power requirements for the specific model. If I want to record without an extra XLR set-up, the microphone needs to work with my computer. Around 20% of consumers prioritise a straightforward connection.
Stereo or mono Check that you have two microphone inputs, cables and enough space, and that the booth sounds suitable. If I want a wider guitar sound, I need to know whether my room and equipment support stereo recording. Around 10% of consumers prioritise stereo above all else.

Common pitfalls

  • Buying a stereo pair before listening to your booth

    Stereo can capture unwanted room sound and requires two microphone channels. Make a mono test recording first and listen to how the booth sounds.

    The set-up may also require a second microphone input, extra cables and additional stands or accessories.

  • Mistaking an XLR condenser for a USB microphone

    An XLR model such as the Audio-Technica PRO37 needs a suitable input and phantom power; a USB microphone uses a different connection. Check the exact connections and power requirements against your recording equipment.

    If you don’t have the equipment you need, you may need a suitable interface, preamp or power supply.

  • Expecting a new microphone to fix poor booth acoustics

    Reflections and background noise can still colour the recording. First, test the microphone position and listen to how the room affects the sound.

Brands to compare

LEWITT

The LCT 040 MATCH is a compact instrument microphone, available as a single microphone or a matched pair.

  • LEWITT describes its guitar reproduction as clear and defined; this is the manufacturer’s description.
  • Stereo recording requires two channels and a suitable room.

Audio-Technica

The PRO37 is a compact XLR instrument microphone; the AT2020USB-X is a separate USB option for computer recording.

  • Audio-Technica says the PRO37 requires 11–52 V DC phantom power. The AT2020USB-X offers USB-C and direct monitoring.
  • The USB version is not the same model as the PRO37, and it won’t necessarily suit a future set-up with two microphones.

Shure

The SM57 is a dynamic cardioid XLR option for anyone looking for a different tonal balance from that of a condenser microphone.

  • Shure describes it as having a presence boost and a focused pick-up pattern.
  • The SM57 is not a neutral substitute for every small-diaphragm condenser; assess its sound and the available preamp gain with your guitar.

RØDE

The M5 is a matched cardioid condenser pair for anyone who also wants the option of recording in stereo.

  • RØDE specifies a maximum sensitivity difference of 1 dB within the pair and P24/P48 power.
  • These features don’t prove that stereo will sound better in a small booth; you’ll still need two channels and suitable positioning.

Joybuy product pick

This product pick is a compact USB microphone for anyone considering a USB set-up. Check separately whether the microphone is suitable for recording acoustic guitar.

Razer SEIRÉN V3 MINI White Ultra-Compact USB Microphone

Razer SEIRÉN V3 MINI White Ultra-Compact USB Microphone

This compact USB model may be worth considering if you’re looking for a USB microphone. However, a USB connection alone doesn’t determine whether a microphone is suitable for acoustic guitar.

Variant: White. Connection: USB.

Joybuy

Frequently asked questions

Where should you start when positioning one microphone?

As a starting point, aim it towards the point where the neck meets the body, from a distance of around 20–30 cm. This is LEWITT’s positioning advice; then listen to see whether a different distance works better in your booth.

Do you only need a second microphone for stereo?

No. The stereo set-up described by LEWITT also requires two XLR microphone inputs, two cables and suitable positioning. Check the power requirements of your chosen pair, too.

How can you reduce unwanted booth sound?

Listen to recordings from different positions and, where possible, reduce distracting background noise and audible reflections. LEWITT recommends a suitable recording space and absorbent materials; a microphone alone is no substitute for considering these factors.

What rights do you have when buying online in the Netherlands?

For an online consumer purchase, you generally have a statutory cooling-off period of up to 14 days after delivery, although exceptions apply. You’re also covered by the statutory guarantee if a product, when used normally, does not meet what you could reasonably expect; the seller is your point of contact. A manufacturer’s guarantee does not replace this right.

Does a CE mark prove that a microphone is suitable for my recording?

No. A CE mark doesn’t tell you whether a specific microphone’s sound, compatibility or documentation is right for your set-up. European and Dutch government guidance sets out conformity obligations for equipment covered by the relevant rules; check the product specifications and accompanying conformity information.