Who is this guide for?

Guitarist playing alongside other musicians

You’re recording acoustic guitar while others are playing, and want to assess the balance between the guitar and the spill from other instruments. Shure describes the SM57 as a cardioid instrument microphone.

Guitarist looking for tonal detail

You can record in a relatively quiet rehearsal room and want to hear the guitar’s attack and tone clearly in the recording. LEWITT suggests aiming towards the 12th fret as a starting point for the LCT 040 MATCH.

Recording rehearsals with a sense of space

You want to capture the ensemble or the room as well as the guitar, and can use two recording channels. LEWITT also offers the LCT 040 MATCH as a stereo pair.

What should you look for when buying?

One dynamic cardioid microphone

A good choice if: you want to record close to the guitar while other musicians are playing, or don’t have phantom power available. Shure says dynamic microphones are less likely to pick up background noise.

Bear in mind: cardioid recording won’t completely exclude other instruments, so positioning and the volume in the room still matter.

One small-diaphragm condenser

A good choice if: you want to capture the detail of your guitar and can position the microphone carefully. The 12th fret is a starting point for the LEWITT LCT 040 MATCH.

Bear in mind: the microphone won’t compensate for a noisy room. Check the power requirements of the specific model.

Large-diaphragm condenser

A good choice if: you’re looking for an XLR microphone that can also be used for other studio recordings. The Audio-Technica AT2020 is a cardioid large-diaphragm model.

Bear in mind: according to Audio-Technica, the XLR version of the AT2020 requires 48 V phantom power and is not the same as the USB version.

Two microphones for stereo

A good choice if: you deliberately want a recording with a greater sense of space and have two suitable recording channels. The LEWITT LCT 040 MATCH is also available as a matched stereo pair.

Bear in mind: two microphones will capture more of the room, and require extra connections and space for positioning.

What to consider What should you check? Who is this important for?
Spill Test the microphone close to the guitar while the others play at a normal rehearsal volume. Cardioid directionality doesn’t guarantee complete isolation. If I’m recording with the band at the same time, I want to distinguish the guitar more clearly from the other instruments. Around 36% of consumers put reducing spill first.
Guitar tone and playing attack Make a test recording and adjust the distance and angle. You could start by pointing the microphone towards the area around the 12th fret. When I’m playing in a quieter room, I want to hear the guitar’s attack and tone clearly. Around 29% of consumers prioritise natural guitar tone and playing attack.
Connection and power Check the input on your recorder or interface, whether phantom power is required, and whether a cable and stand are included with the version you’ve chosen. I want to be able to use the microphone with my existing recording equipment and know in advance what else I’ll need. Around 21% of consumers prioritise a suitable connection that’s ready to use.
Mono or stereo Decide whether you want to hear the room, and check that you have two suitable inputs and enough space to position the microphones. If I also want to capture the ensemble or the room, I’m looking for a recording with a sense of space and can use two channels. Around 14% of consumers put stereo first.

Common mistakes

  • Assuming cardioid recording blocks out every other band member

    A directional polar pattern reduces sound picked up from certain directions, but positioning and the balance of sound in the room still make a difference.

    Start with a short test recording while the others play at a normal rehearsal volume.

  • Choosing a condenser microphone without checking the power requirements

    Power requirements vary by model. For example, the XLR version of the Audio-Technica AT2020 requires 48 V phantom power.

    Check the exact model against the capabilities of your recorder or interface, and see which cables and accessories are included with that version.

  • Choosing a stereo pair when you only need one guitar track

    Stereo can capture more of the room, while one microphone may be a simpler choice for a compact mix.

    First decide whether you want to hear the room and whether you have two suitable recording channels.

Brands to compare

Shure

Shure offers two different options for recording instruments: the dynamic SM57 and the condenser SM81.

  • According to Shure, the SM81 has a cardioid polar pattern and an adjustable low-frequency roll-off.
  • The SM57 is a dynamic instrument microphone. The features of one model don’t automatically tell you about the tone or isolation of the other.

RØDE

According to RØDE, the NT5 is a cardioid small-diaphragm condenser for acoustic instruments.

  • The NT5 uses P48 phantom power and has a 3-pin XLR output.
  • Check whether you’re buying a single NT5 or a matched pair.

AKG

AKG describes the P170 as a small-diaphragm condenser suitable for instruments including acoustic guitar.

  • According to AKG, the P170 has a cardioid polar pattern and switchable attenuation.
  • The stated power supply voltage for this model is 44–52 V, so check that your equipment is compatible.

Audio-Technica

The AT2020 is a cardioid large-diaphragm XLR microphone for anyone who also wants to make other studio recordings.

  • According to Audio-Technica, the AT2020’s polar pattern is designed to reduce sound from the sides and rear.
  • The XLR version requires 48 V phantom power. Don’t confuse it with the AT2020-USB.

LEWITT

The LCT 040 MATCH is a compact condenser microphone for instruments, available individually or as a stereo pair.

  • LEWITT suggests aiming towards the 12th fret as a starting point for recording guitar.
  • Check what’s included in the set and whether you need 48 V power. The stereo image described by the manufacturer isn’t a measurement of your rehearsal room.

Products related to this topic

Related products will be available soon.

Frequently asked questions

Where should I point one microphone to start with?

For your first test, point the microphone towards the area around the 12th fret, then adjust the distance and angle by ear. LEWITT suggests this as a starting point for the LCT 040 MATCH; it isn’t a fixed setting for every guitar or room.

Do all condenser microphones need the same power supply?

No, the power requirement depends on the model. According to their manufacturers, the Audio-Technica AT2020 and LEWITT LCT 040 MATCH require 48 V, the RØDE NT5 uses P48, and AKG specifies 44–52 V for the P170. Also check whether your recorder or interface can supply the required power.

What extra equipment might I need?

Check that you have a suitable input, XLR cable, stand and holder. Audio-Technica lists a stand mount as included with the AT2020, while the XLR cable is sold separately. Check what’s included with the version you’re considering.

What are my rights when buying a microphone online?

For many distance purchases made by consumers from a business, there’s a 14-day cooling-off period, according to the Government of the Netherlands. There are exceptions, and the situation may be different when buying from a private seller. If a product is faulty, your consumer rights apply alongside any manufacturer’s warranty.

Can I post a rehearsal recording featuring other musicians online?

Not without considering the rights to the music and the agreements you have with the people involved. The Government of the Netherlands says that copyrighted music can’t simply be distributed or made available to the public. If you publish other people’s personal data, the privacy rules and exceptions outlined by the Dutch Data Protection Authority may also be relevant.