Who are these setups suited to?

Guitarist in a reverberant hall

You want the guitar to take centre stage, even with the hall or other people audible in the recording. Microphone placement and the balance between direct and ambient sound are key. Shure covers these points in its microphone guidance.

Recording maker aiming for a sense of space

You want to capture a stereo image and can set up two microphones and recording channels. Bear in mind that you may pick up more hall noise, and check the recording in mono too; RØDE describes potential phase issues with spaced microphones.

Guitarist with a simple recording setup

You want to check first that your existing recorder or interface is compatible with the microphone and can supply the required power. If you’re connecting an XLR microphone to a computer, you may need an audio interface, as RØDE explains for this setup.

What should you consider when choosing?

One cardioid condenser microphone

Choose this if: you want to make a mostly direct guitar recording and have one suitable XLR channel with the required phantom power.

Bear in mind: this won’t capture a two-channel stereo image; distance and direction affect the balance between the guitar and the hall.

Two condenser microphones as a stereo pair

Choose this if: you deliberately want to record width or some of the hall, and have two suitable channels and the required power available.

Bear in mind: this setup takes more preparation. RØDE warns that differences in arrival time between spaced microphones can cause phase issues.

One dynamic cardioid microphone

Choose this if: you want to use a dynamic instrument microphone and can position it close to the guitar. Shure describes the SM57 as a dynamic cardioid microphone for instrument recording.

Bear in mind: the type of microphone won’t automatically eliminate hall noise, and it doesn’t prove on its own that the recording will sound better than one made with a condenser microphone.

What to consider What to check before buying Who should consider this?
Guitar versus hall noise Check the polar pattern and try different positions; the 12th fret is a starting point, not a set solution. In a reverberant hall, I want the guitar to remain clear without bringing unwanted hall noise to the fore. Around 40% of consumers prioritise the direct sound of the guitar.
Stereo and hall ambience Check that you have two recording channels, whether the package includes one microphone or a pair, and how the recording sounds in both stereo and mono. If you want to capture the width of the guitar or part of the room, you’ll need to factor in the extra setup and possible phase issues. Around 20% of consumers make stereo their top priority.
Connection and power Compare the XLR connection and power requirements of the exact model with your recorder, mixer or audio interface; for stereo, check both channels. I want to know in advance whether my existing equipment will work with the microphone before choosing a setup. Around 20% of consumers put connection and power at the top of their list.
Equipment needed and after-sales support Check what’s included with the exact product, what you already have and who the seller is. If I want a manageable setup, I need to know which extra parts I’ll need and who I can contact with any questions afterwards. For around 20% of consumers, a complete setup with suitable after-sales support is also the top priority.

Common mistakes

  • Expecting a directional microphone to eliminate all hall reverb

    The balance between the guitar’s direct sound, reflections and other noise still depends on microphone placement. A cardioid polar pattern won’t shut out the hall completely.

    Make a test recording in the intended position and vary the distance and direction before assuming a different microphone is the answer.

  • Choosing a stereo pair without two suitable recording channels

    The stereo setup described here uses two microphones and separate recording channels.

    Check the number of inputs and the power available for each one. Also check whether the package contains one microphone or a pair.

  • Not checking two widely spaced microphones in mono

    Differences in arrival time can cause phase issues with a spaced stereo setup.

    Listen to a test recording in mono and adjust the spacing if needed.

Brands to consider

Shure

The SM81 is a cardioid condenser microphone for instruments; the SM57 is a dynamic cardioid instrument microphone.

  • According to Shure, the SM81 has a switchable low-frequency response and runs on 12–48 V DC phantom power.
  • These features don’t show that either model will sound better in every community hall.

RØDE

The NT5 is a cardioid small-diaphragm condenser microphone; the M5 is sold as a matched stereo pair.

  • According to RØDE, the NT5 requires P48 via XLR. The M5 set contains two selected cardioid microphones and runs on P24 or P48.
  • For stereo, you’ll also need two recording channels and suitable microphone placement.

Audio-Technica

Audio-Technica describes the compact PRO37 as a cardioid condenser microphone, also suitable for acoustic guitar.

  • The European product specification lists XLR and 11–52 V DC phantom power.
  • A cardioid pattern doesn’t guarantee a reverb-free recording; the room and microphone placement still matter.

AKG

AKG describes the P170 as a small-diaphragm condenser microphone for instruments including acoustic guitar.

  • The product description lists switchable attenuation.
  • Having this switch doesn’t in itself prove an advantage for an ordinary acoustic guitar recording.

Joybuy products

Related products coming soon.

Frequently asked questions

Where should I position one microphone in the hall?

As a starting point, aim the microphone towards the area around the 12th fret and make a short test recording. Shure recommends adjusting the position and distance to get the balance you want between the instrument and the hall; moving closer to the instrument can help with unwanted background noise. A set distance won’t work in every room.

Do I always need 48 V for a condenser microphone?

No, the power required varies by model. RØDE specifies P48 for the NT5 and P24 or P48 for the M5; Audio-Technica lists 11–52 V DC for the PRO37. Also check that you have the right XLR input and, for stereo, two recording channels.

How can I avoid problems with two microphones?

After setting up, listen in both stereo and mono. RØDE warns that differences in arrival time between spaced microphones can cause phase issues, so experiment with their positioning.

Who can I contact if a microphone I’ve bought develops a fault?

According to the Dutch government, the seller is responsible for resolving the issue if a product is faulty. There is no fixed statutory guarantee period in the Netherlands; any manufacturer’s warranty is in addition to your statutory rights.

Can I publish a recording from the community hall without permission?

It depends on what’s been recorded and who can be identified. According to the Dutch government, you generally need permission to make someone else’s copyright-protected music available to the public. If an organisation records identifiable visitors and processes personal data, it needs a lawful basis under the GDPR, according to the Dutch Data Protection Authority. The event guidance cited relates to images and does not by itself determine what applies to every audio recording; assess the specific recording and purpose of publication separately.