Who is this recording setup suitable for?

Acoustic guitarist looking for detail

You want to capture your guitar’s attack and nuances, and can try different microphone positions in a quiet room. RØDE describes positioning a microphone by the 12th fret as a technique for recording acoustic guitar.

Demo maker without an audio interface

You want to record directly to a computer. Check the connection on the exact model, and what else you’ll need to record and listen back. RØDE describes the NT1 5th Generation as offering both USB and XLR.

Recording in a challenging room

You can hear reverberation or background noise and want to experiment with distance and positioning first. Shure recommends pointing the SM57 towards the desired sound source and away from unwanted sound sources.

What should you look for when choosing?

First, make a test recording in the room where you plan to record. Then choose based on the sound you want, the connections available and whether you need mono or stereo.

What to consider What should you check? Who is this important for?
Detail in the guitar Compare positions from the same playing spot, and check the microphone type and polar pattern. If I want to capture attack and nuances in a quiet room, I want to try different positions first. Around 33% of consumers give detail in the acoustic guitar their top priority.
Connections and equipment Check whether it uses USB or XLR, which inputs are available and, where necessary, the model’s power requirements. If I want to record to my computer without an external interface, the right connection is crucial. Around 27% of consumers prioritise a simple connection.
The effect of the room Make a test recording at different distances and listen for reverberation and background noise. If I can hear reverberation or ambient noise, I want to find out what difference a change of position makes. Around 20% of consumers give the effect of the room their top priority.
Mono or stereo Decide whether mono is enough; for stereo, check that you have two microphones and two suitable inputs. If I want to record the guitar as a stereo image, my recording equipment needs to handle two inputs. Around 20% of consumers give stereo their top priority.

Common buying mistakes

  • Expecting a different microphone to silence the room

    Distance and positioning affect the recording, but a cardioid microphone won’t pick up only the sound source you want.

    Make test recordings in your own room from different positions before choosing a microphone type.

  • Buying an XLR microphone without checking the recording chain

    An XLR model needs a compatible connection; some condenser microphones also require a specific power supply.

    Check the full model name, output, power requirements and what’s included. Allow for an interface, compatible power supply, cable or stand if you still need one.

  • Assuming USB, XLR and 32-bit float are simultaneous features of the NT1 5th Generation

    USB and XLR don’t work at the same time on this RØDE model. 32-bit float output is available via USB only.

    Decide in advance which connection you want to use for recording, and check which features are available with that option.

  • Expecting stereo sound from one microphone

    A standard microphone usually records one channel; stereo requires a suitable setup and recording equipment.

    Only buy a pair if stereo suits your demo and you can use two suitable inputs. If necessary, allow for an extra cable, stand and input.

Relevant microphone brands

RØDE

The NT1 5th Generation offers USB and XLR connections for a single source; the M5 is a separate product sold as a matched pair.

  • RØDE says the NT1 5th Generation comes with a shock mount and cables.
  • USB and XLR don’t work at the same time on the NT1 5th Generation; 32-bit float is USB only. Stereo recording with two M5 microphones requires two microphone channels.

Shure

The SM57 is a dynamic XLR microphone that you can position close to an instrument if you want to try this recording sound.

  • Shure describes the SM57 as an instrument microphone and recommends pointing it towards the desired source.
  • Positioning the microphone won’t soundproof a room or guarantee the same level of detail as a condenser microphone.

AKG

According to AKG, the P170 is a small-diaphragm condenser microphone for acoustic guitar and other string instruments, among other uses.

  • AKG specifies a cardioid polar pattern and a balanced XLR output.
  • AKG specifies a power supply voltage of 44–52 V. Check that your recording chain is compatible; these specifications don’t determine which sound will work best in your room.

Audio-Technica

The AT2020 is a cardioid XLR condenser microphone for use with a compatible recording chain.

  • Audio-Technica describes the AT2020 as a condenser microphone with a cardioid pattern and XLR output.
  • This XLR version requires power via the XLR cable. Check the full model name and don’t confuse it with a separate USB version.

sE Electronics

sE Electronics describes the sE7 as a small-diaphragm condenser microphone for applications including acoustic guitar.

  • The manufacturer lists acoustic guitar as one of its applications.
  • Check whether you’re buying one microphone or a pair if you want to record in stereo; the manufacturer’s description isn’t an independent comparison with other models.

Microphones for your demo on Joybuy

This selection mainly includes USB microphones, as well as a wireless microphone system. Check each model to make sure its connection and setup suit the way you plan to record.

USB condenser microphone with cardioid pattern

USB condenser microphone with cardioid pattern

This USB version may suit you if you want to record directly to a computer; check in advance that its connections and monitoring are compatible with your recording chain.

The product description lists a condenser capsule, cardioid pattern, boom arm, shock mount and pop filter.

View on Joybuy
DJI Mic 3 with two transmitters, one receiver and charging case

DJI Mic 3, 2 TX + 1 RX + Charging Case

This set is for anyone looking for a system with two transmitters and one receiver; check that its connections are compatible with your computer or recorder.

The product name lists two transmitters, one receiver and a charging case.

View on Joybuy
HyperX SoloCast 2 USB microphone in black

HyperX SoloCast 2, USB microphone, Black

This USB microphone may suit you if you’re looking for a compact desk setup; check that its positioning and connection fit your recording plans.

The product information lists USB, a cardioid pattern, plug-and-play setup, a built-in shock mount and pop filter.

View on Joybuy
Razer Seiren V3 Mini Quartz USB microphone

Razer SEIRÉN V3 MINI Quartz, USB microphone

This USB microphone may suit a compact recording setup; check that its polar pattern and connection work with your sound source and positioning.

The product information lists USB, a supercardioid pattern and tap-to-mute controls.

View on Joybuy

Frequently asked questions

Can I make an acoustic demo with one microphone?

Yes. Start with a mono test recording and move the microphone until the balance works for your demo. If you want to adjust the vocals and guitar separately later, or record the guitar in stereo, plan for separate recording channels and a suitable setup.

Does every condenser microphone need an audio interface and 48 V phantom power?

No, it depends on the model and connection. The RØDE NT1 5th Generation can connect directly to a computer via USB; for the XLR option, you’ll need a compatible recording chain. AKG specifies a power supply voltage of 44–52 V for the XLR P170, so check the requirements for the exact model.

How should I position and maintain the microphone?

Start by making a test recording with the microphone pointed at the 12th fret, then vary the distance and angle. Use a stable mount and follow your model’s manual for storage and cleaning.

What extra costs and warranty rights should I check?

Check whether you already have an interface, cables, a stand and, if needed, a second microphone input, and what’s included with the version you’ve chosen. According to the Dutch government, there is no fixed statutory warranty period in the Netherlands; your rights if a product is faulty depend on what you could reasonably expect from it. For distance purchases, the Dutch government says the cooling-off period is usually 14 days.

Is CE marking compulsory for every microphone in the Netherlands?

It depends on the specific product group and version. The Dutch government states that CE marking is compulsory for designated product groups; other product safety requirements may also apply even when CE marking isn’t compulsory. Check with the seller and for the specific product to find out which requirements apply.