Who might need an audio interface?

Editing existing guitar tracks

You want to listen through headphones, trim tracks and assess effects in peace and quiet. First, try your computer’s playback output: the Audacity Manual explains that playback depends on the selected playback device, while edits such as cutting and pasting are carried out in the software.

Recording guitar with two microphones

You want to use two microphones at the same time, so you’ll need two microphone preamps that are available simultaneously. Check the inputs for each channel, not just the total number of sockets.

Recording guitar with a microphone and pickup

You want to record a microphone signal and a direct guitar signal separately, so you can blend them later. Check that a suitable instrument input can be used at the same time as the microphone input.

What should you look for?

First decide whether you’ll only be playing back existing material or making new recordings too. Then choose your connections and monitoring to suit your actual recording setup.

What to consider What should you check? Who is this important for?
Listening and editing Check that your wired headphones fit the audio output you already have and that you can adjust the volume comfortably. Also check the connections on any active speakers you use. If you mainly listen to and edit existing tracks, first check whether your current listening setup meets your needs. Extra microphone inputs won’t make up for a missing headphone socket. Around 40% of consumers focus primarily on this listening check.
Two microphones Count the microphone preamps you can use at the same time and check whether your microphones need phantom power. If you want to use two microphones at once, you’ll need two suitable microphone inputs. Around 30% of consumers have this as their main requirement.
Microphone and pickup Check that a microphone input and a suitable instrument input are available at the same time. If you prefer, record the sources on separate tracks. If you want to edit the sound from a microphone and a pickup separately, make sure both sources can be connected at once. Around 20% of consumers prioritise this combination.
Monitoring during overdubs Check whether the model offers direct monitoring and a useful balance with the playback audio. In your software, choose which monitoring route to use. If you play guitar along with existing tracks, the timing of the monitored input signal may matter. Around 10% of consumers consider monitoring delay their main concern.

Direct monitoring sends the incoming signal to your listening setup without first routing it through the recording software. This doesn’t automatically let you hear software effects on that signal. If you’re only playing back and editing an existing file, the software’s playback route is what matters.

With the Scarlett 2i2 4th Gen, also check how the inputs are assigned: Focusrite says that plugging into a front jack socket disables the corresponding XLR input. So, to connect two microphones, you need two microphone inputs that are actually available at the same time—not just two sockets of different types.

Common pitfalls

  • Buying an interface just to edit an existing file

    Trimming tracks and applying effects are things you do in your editing software. An interface doesn’t add any new editing features.

    First, test playback through your computer’s current output and work out which specific connection or recording feature you’re missing.

  • Assuming two inputs will let you connect two microphones and a guitar

    The number of inputs doesn’t automatically tell you how many microphones you can connect at once. With the Scarlett 2i2 4th Gen, plugging into a front jack disables the corresponding XLR input, as stated in Focusrite’s hardware information.

    Before you buy, map out which source will go into each channel and check that all the inputs you need can be used at the same time.

  • Confusing direct monitoring with hearing software effects

    Direct monitoring routes the incoming signal around software monitoring. As a result, you won’t automatically hear the software’s edits or effects through that route.

    When recording, choose deliberately between direct and software monitoring. Ableton recommends turning off monitoring on the recording track when you’re using the direct monitoring option.

  • Expecting a pickup and microphone to blend into one sound automatically

    A pickup and a microphone capture different signals, so blending them may take some attention during post-production.

    If you prefer, record the sources separately and judge how they sound together by ear during post-production.

Brands to consider

Focusrite

The Scarlett Solo 4th Gen is designed for one microphone and one instrument, while the Scarlett 2i2 4th Gen has two microphone preamps for a different recording setup.

  • Focusrite lists direct monitoring and separate headphone level control for the 2i2.
  • On the 2i2, plugging into a front jack socket disables the corresponding XLR input. Check which connections can be used at the same time.

Audient

The iD4 MKII is an option for a setup with one microphone, one instrument and two physical headphone sockets.

  • Audient specifies direct monitoring, 48 V phantom power and two headphone sockets.
  • Audient lists one microphone preamp. Having two headphone sockets doesn’t in itself mean you get two independently adjustable headphone mixes.

PreSonus

The Studio 24c is designed for two microphone, instrument or line-level sources, and has controls for level monitoring and direct monitoring.

  • PreSonus specifies two combo inputs, level meters and a Mix control for direct monitoring.
  • These connections and controls don’t prove that you’ll hear any improvement when editing files that have already been recorded.

Arturia

The MiniFuse 2 combines two combo inputs with monitoring features and additional connection options.

  • Arturia specifies a 48 V switch and a direct mono monitoring mode.
  • MIDI and the USB hub are mainly useful if you actually need those connections.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need an audio interface for existing acoustic guitar tracks?

Not just to trim tracks or apply effects—that’s done in the editing software. First, try your existing audio output, and only choose an interface if you need a specific connection or recording feature that you don’t currently have.

Does an interface with two inputs mean you can connect two microphones?

Not always. Check how many microphone preamps it has and whether they can be used at the same time. Audient specifies one microphone preamp alongside an instrument input for the iD4 MKII. With the Scarlett 2i2 4th Gen, plugging into a front jack socket disables the corresponding XLR input, according to Focusrite.

Why can you sometimes hear your guitar through two monitoring routes?

This can happen if both direct monitoring and monitoring through the recording track in your software are active. Choose which route you want to use; Ableton recommends turning off monitoring on the recording track when you’re using direct monitoring.

What does CE marking mean on an audio interface?

CE marking is required for products covered by EU rules that require it. The European Commission sets out the electromagnetic compatibility requirements, while Your Europe explains that CE marking only applies where relevant EU rules require it. The mark isn’t an independent test result for a specific product.

What can you expect if your audio interface develops a fault?

If you buy as a consumer in the Netherlands, you’re entitled to a product that works as it should, and the seller is your point of contact if a problem arises. According to the Dutch government, the Netherlands has no fixed statutory guarantee period; what you can expect in your situation depends on the circumstances and how the product has been used.