Who is this buying guide for?

Label maker owners checking the battery type first

You want to buy an AA charger, but first check the exact model: according to Brother Netherlands, the Brother PT-H110 uses AAA batteries or an optional adaptor.

Anyone wanting to get a set ready during the day

You want to have suitable cells ready before bedtime, so you check the charging channels and look for a clear charging status. Twente Fire Service recommends charging during the day where possible, when you’re nearby.

What should you look for when buying?

First, check which battery size and cell chemistry your label maker supports. Then consider how many cells you want to charge at once, and choose a time when you can stay nearby.

What to consider What should you check? Who should pay particular attention?
Will the battery fit? Check the manual for the size, permitted cell chemistry and number of cells required. If I want to avoid buying a charger for the wrong size, I check the manual for my model first. Around 40% of consumers put compatibility first.
Where and when to charge Choose a clear, hard surface. Ideally, charge during the day, not under bedding. If the charger is in my bedroom, I want to charge while I’m nearby and have somewhere clear to put it. Around 33% of consumers prioritise charging safely around bedtime.
Number of charging channels Check whether you can charge a single cell or a complete set at once, and how long charging that number of cells takes. If I want a complete set ready to use, I check how many cells can be charged at once and how long it takes. Around 17% of consumers prioritise being prepared in this way.
Charger and cells together Check whether cells are included, and compare battery features separately from the charger. If I want to weigh up the total cost, I also check whether I already have the right rechargeable cells. Around 10% of consumers prioritise the cost of the charger and batteries.

Common buying mistakes

  • Choosing an AA charger without checking your label maker’s model

    Not every label maker uses AA cells. According to Brother, the Brother PT-H110 works with AAA batteries or an adaptor.

    Before buying, check the manual for your exact model, then check the size and permitted cell chemistry.

    If you choose the wrong charger, you may still need to buy compatible AAA cells or a different charger.

  • Assuming a fast charging time applies to every full set

    Manufacturers give charging times for specific numbers of cells, capacities and charge levels. So a time given for two cells won’t necessarily tell you how long another set will take.

    Only compare times when the number of cells and starting charge level are the same. Allow plenty of time before bed.

  • Assuming automatic shut-off means it’s safe to charge overnight

    Automatic shut-off doesn’t replace a clear charging area or supervision while charging. The Fire Service recommends charging when you’re nearby where possible.

    Charge on a hard surface, keep the charger clear and don’t put it under a pillow or duvet.

Brands to compare

IKEA

According to IKEA, the STENKOL is designed for one to four rechargeable AA or AAA NiMH cells.

  • IKEA lists four independent charging channels, status lights and automatic shut-off.
  • IKEA gives a typical charging time of 6–8 hours for four AA cells, so allow plenty of time before you need them.

Panasonic eneloop

The BQ-CC55 is an option if individual status information and a model-specific charging time for eneloop cells are important to you. The BQ-CC50 is designed to charge up to two cells at a time.

  • Panasonic gives a charging time of around 90 minutes for two AA eneloop cells with the BQ-CC55. This time applies to that combination.
  • The plug type may vary by region. Panasonic gives the BQ-CC50 a fixed 13-hour safety timer; this isn’t the same as stopping as soon as each cell is fully charged.

VARTA

The LCD Charger 57070 is a NiMH charger for two or four AA or AAA cells.

  • VARTA lists a display, fault detection and temperature control.
  • The stated charging time of 2–4 hours is based on four 1600 mAh AA cells. This time won’t necessarily apply to different numbers of cells or capacities.

Duracell

The Hi-Speed Advanced Charger CEF27 is specified for charging two or four AA or AAA cells at a time.

  • Duracell claims a charging time of 45 minutes for specific partially charged NiMH cells.
  • This isn’t a general charging time for fully charging every battery set; check the conditions for the cells you’re using.

Products available at Joybuy

This product selection focuses on getting up to four AA or AAA cells ready to use. Before buying, check that the size and cell chemistry are suitable for your label maker.

Aigostar Quick Battery Charger with Smart IC for 4 AA or AAA cells, black

Aigostar Quick Battery Charger with Smart IC, 4 AA/AAA, black

An option if you want to get four AA or AAA cells ready to use. First, check which size and cell chemistry your label maker supports.

The product name specifies four AA or AAA cells.

Joybuy

Frequently asked questions

Can I assume my label maker needs AA batteries?

No. Check the exact model and its manual before buying. According to Brother, the Brother PT-H110 uses AAA batteries or an optional adaptor.

Can I charge ordinary alkaline AA batteries in a NiMH charger?

No. Only use a NiMH charger with rechargeable cell types approved by the manufacturer. Panasonic states that the BQ-CC55 detects faults and shuts off if a non-rechargeable battery is inserted by mistake.

Is automatic shut-off enough to charge beside my bed while I sleep?

No. The Fire Service recommends charging during the day when you’re nearby, where possible. Place the charger on a clear, hard surface, keep it away from pillows and duvets, and charge in a room with a smoke alarm.

What rules apply to an electric charger sold in the Netherlands?

According to Ondernemersplein, the Dutch government’s business information portal, an electrical appliance must meet the applicable European requirements. The manufacturer must apply a CE mark and draw up an EU declaration of conformity. Check the documentation for the specific product: a claim in an advert alone doesn’t prove that an individual unit has been checked.

Where can I recycle used batteries?

Take batteries to a designated collection point in a shop or at a recycling centre, separately from your general waste. For damaged cells, follow the separate packaging instructions provided by the Waste Separation Guide.