Who is this choice relevant to?

Photographer with one AA flash set

You want to charge a suitable set at home and see easily when the cells are ready. Check your flash’s manual first. For example, Canon Europe specifies four AA cells and HR6 Ni-MH cells for the Speedlite EL-10, but that specification doesn’t automatically apply to other flashes.

Photographer with several AA sets

You want to prepare enough cells before a shoot, so you compare the number of charging bays and the time needed to charge a full set, rather than looking only at the fastest stated charging time.

Photographer who wants to check their cells

If you use your cells regularly, you want to be able to monitor or test them individually before putting them back into a set. Individual charge status or a capacity test may be useful.

What should you look for when buying?

First, check which battery technologies your flash allows. Then compare how many cells you want to charge at once, how long a full set takes and how much information you need about individual cells.

What to consider What should you check? Who is this important for?
Compatibility Compare the battery technologies allowed by your flash’s manual with the cells and charger. AA indicates the size, not whether a cell is rechargeable. To avoid a mismatch between your flash, cells and charger, start by checking the manuals. Around 36% of consumers say compatibility is their main concern when buying.
Number of charging bays Count the cells in your flash and any spares. Check how many you can charge at once, and whether the charger can charge a single cell. If you want to have a full flash set and possibly spare cells ready in advance, the number of charging bays is a key consideration. Around 29% of consumers give this their top priority.
Charging time Compare the time for the same number of cells under the same conditions. IKEA Netherlands states that STENKOL takes 3–4 hours to charge one or two AA cells, and 6–8 hours to charge four. If there’s little time between shoots, it matters how long a full set takes to charge. Around 21% of consumers say charging time is their main concern when buying.
Individual cell monitoring Decide whether a charging or ready indicator is enough, or whether you want individual cell information and a capacity test. If you manage several sets and want to monitor or test individual cells, check what each charging bay indicates. Around 14% of consumers make this their top priority.

Common buying mistakes

  • Assuming the charging time for two cells applies to a full set

    The stated time can vary depending on how many cells you’re charging. So a short charging time for two AA cells won’t tell you how long four will take.

    Compare the manufacturer’s figures for the number and type of cells you actually want to charge at once.

    You may need to get your set ready for a shoot earlier.

  • Assuming every AA cell is rechargeable

    AA refers to a size, not whether a battery is rechargeable. IKEA warns that non-rechargeable batteries must not be charged in the STENKOL charger.

    Check the cell markings, your flash’s manual and the charger’s compatibility before charging any cells.

    Charging the wrong cells can pose a safety risk.

  • Comparing only the charger and overlooking what’s in the box

    Some versions are bundles that include cells. The power supply included with a USB charger may also vary by version.

    Check the exact version and packaging, including cells, cable and any power adapter.

    If the box doesn’t include the cells or power supply you need, you may have to buy them separately.

Brands to compare for this choice

IKEA

STENKOL is a simple plug-in charger for AA and AAA NiMH cells.

  • IKEA says STENKOL has four independent charging channels and status lights.
  • IKEA gives a typical charging time of 6–8 hours for four AA cells. Check which cells are included with a STENKOL/LADDA set.

Panasonic

According to Panasonic, the BQ-CC55 is designed for one to four AA or AAA eneloop and eneloop pro cells.

  • Panasonic specifies that charging ends individually for each cell.
  • The approximately 90-minute charging time applies to two AA eneloop cells. Panasonic says it depends on the temperature and the condition of the cells, so it isn’t a charging time for four cells of every brand. Check the version and plug.

VARTA

According to VARTA, the LCD Smart Charger+ combines four AA/AAA charging bays with a display and USB-C power.

  • VARTA says the display shows information such as voltage, charging current and time, and offers charging and refresh modes.
  • The stated charging time of 1.5 hours is based on two 1600 mAh AA cells. Check which power accessories are included with the version on offer.

ANSMANN

According to ANSMANN, the Powerline 4.2 Pro is an AA/AAA NiMH charger with adjustable programmes.

  • ANSMANN lists charging, discharging, refresh programmes and a capacity test for each charging bay.
  • The extra functions are most useful if you want to manage or test your cells. You may not need them if you’re only charging a familiar set.

GP

GP’s Netherlands page describes the ReCyko M452 as a set comprising a charger and four rechargeable 2600 mAh AA cells.

  • The bundle may be a good option if you also need new AA cells.
  • Check the charging specifications for the exact version and make sure its features suit your needs.

Joybuy products

This selection includes a set of rechargeable AA lithium cells with a charger, as well as a separate charger for rechargeable NiMH AA cells. First, check your flash’s manual to see whether it supports the relevant battery technology.

Set of eight rechargeable AA lithium cells with USB-C charger

Set of 8 rechargeable AA lithium cells with USB-C charger

May be suitable if your flash’s manual allows these rechargeable AA lithium cells. Check before use.

The product description states that eight cells take 2.5 hours to charge and have LED status indicators.

View at Joybuy
Aigostar charger for four AA or AAA cells

Aigostar Quick Battery Charger for 4 AA/AAA

A possible option if you use rechargeable NiMH AA cells and want to charge them individually. Check whether your flash supports these cells.

The product description lists four independent charging channels, USB power and LED indicators for charging, fully charged and incorrect placement.

View at Joybuy

Frequently asked questions

Can I put any AA battery in a charger?

No. Check which cells your flash allows and which battery technologies the charger supports. The IKEA STENKOL is designed for rechargeable AA and AAA NiMH cells. IKEA warns against charging non-rechargeable batteries. Canon specifies HR6 Ni-MH for the EL-10, but that model specification doesn’t automatically apply to other flashes.

How long does it take to charge a full flash set?

It depends on the number and type of cells, as well as the stated charging conditions. IKEA Netherlands gives a charging time of 3–4 hours for one or two AA cells in the STENKOL, and 6–8 hours for four. When planning, use the time for your full set.

Which batteries and power accessories are included?

This varies by version. The Netherlands STENKOL/LADDA page describes a bundle with four AA cells. VARTA lists a USB-C cable with the LCD Smart Charger+, but check which power accessories are included with the exact version.

How do I clean a battery charger?

Follow the manual for the exact model. For the STENKOL, IKEA recommends unplugging the charger before cleaning and using a dry cloth.

What should I do if a charger I bought in the Netherlands is faulty?

If there’s a problem, contact the seller. According to the Dutch government, the seller must provide a solution. The manufacturer’s warranty is in addition to your statutory rights.

Where can I take used AA batteries?

Take used batteries to a collection point, such as a shop or supermarket that sells batteries. According to the Dutch government, they shouldn’t go in the bin.