Who is this choice relevant to?

Using a charger when sockets are limited

You want to prepare AA batteries using a suitable USB power supply, without needing a separate mains plug for the charger itself.

Check your label maker first

You want to be sure which battery size and rechargeable chemistry your label maker accepts. Some models use AAA rather than AA batteries.

Preparing several batteries at once

You replace several cells at a time and want to choose a charger with enough charging slots and suitable charging combinations for your set.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Power without an extra mains plug Check the charger's input requirements and the output of your USB power supply. According to VARTA, the VARTA LCD Universal Charger+ 57688 requires a Power Delivery power supply of at least 9 V/2 A or 12 V/1.25 A; this is not included. If I have few spare sockets, I want to know whether my USB power supply will work with the charger. Around 28% of consumers prioritise a power source that doesn't need an extra mains plug.
Compatible with your label maker and batteries Check the exact model, battery size and charging instructions for your chosen chemistry. I want to avoid buying cells that don't fit my label maker or can't be used with the charger. Around 28% of consumers put compatibility first.
The right charging combination Check not only the number of slots, but also how many cells you can charge at once and how long your set will take to charge. If I prepare several cells for ready-to-use sets, I want to know whether the charger can handle my usual number at once. Around 17% of consumers prioritise having complete sets ready on time.
Charging status for each cell Check whether the indicator and charging control work per cell or per charging channel. I want to see how each individual cell is doing so I can put my set together. Around 16% of consumers focus mainly on charging status and monitoring.
A complete charging setup Check which cells and power supplies are included with the version you choose, and what else you need. When I buy a charger, I want to know whether I also need to arrange suitable batteries or a power supply. Around 11% of consumers focus mainly on what else they need for a usable setup.

Common mistakes

  • Assuming every label maker uses AA batteries

    Brother's Dutch specifications list rechargeable AA batteries for the PT-P750W, but AAA batteries for the PT-H110.

    Look up the full model number and check the power specifications before buying batteries.

  • Assuming four charging slots mean four independent channels

    According to GP, the GP ReCyko B441 has four slots but two charging channels. Panasonic describes the BQ-CC87 as having individual charging control, with its own restrictions on the batteries you can use.

    Check which quantities and combinations the exact model supports, and read which cells can be used in it.

  • Thinking any USB-C power supply will do

    VARTA specifies particular Power Delivery requirements for the VARTA LCD Universal Charger+ 57688. According to VARTA, the required adaptor is not included.

    Compare the required voltage and current profile with the details printed on your power supply before choosing the charger.

    If you don't already have a suitable power supply, you may need to arrange one separately.

  • Treating battery chemistries as interchangeable

    The XTAR L4 is designed for the NiMH and 1.5 V lithium cells specified by XTAR; XTAR excludes 3.2, 3.6 and 3.7 V lithium cells. Panasonic warns against charging dry-cell batteries in the BQ-CC87.

    Check separately which cells the charger can charge and which batteries your label maker accepts.

Brands to compare

Panasonic eneloop

Panasonic describes the BQ-CC87 as a USB charger for one to four AA or AAA cells, with individual charging control.

  • According to Panasonic, the charger uses a DC 5 V USB input and has individual charging slots.
  • Panasonic specifies eneloop or eneloop pro cells for charging. A USB mains adaptor is not included.

GP Batteries

The GP ReCyko B441 is a USB charger supplied with four 2100 mAh AA cells.

  • GP lists four charging slots and two charging channels, as well as automatic shut-off.
  • So the charging slots are not the same as four separate channels. The stated charging time depends on the battery capacity and power input.

VARTA

The VARTA Universal Charger, model 57658, uses USB-C power and, according to VARTA, charges two or four AA NiMH cells.

  • USB-C power is a good fit for a charging setup where the charger doesn't have its own mains plug.
  • The 57658 is not designed to charge one or three AA cells at once. The LCD Universal Charger+ 57688 is a different model; VARTA lists individual charging slots for it and specifies a Power Delivery power supply with particular requirements, which is not included.

XTAR

XTAR describes the L4 as a USB-C charger for AA and AAA NiMH cells, as well as supported rechargeable 1.5 V lithium cells.

  • Its stated chemistry support is useful if you use the specified 1.5 V lithium cells as well as NiMH cells.
  • XTAR excludes 3.2, 3.6 and 3.7 V lithium cells. The chemistries accepted by the charger don't automatically determine what your label maker supports.

IKEA

According to IKEA, the STENKOL plugs directly into a mains socket and is for AA and AAA NiMH cells.

  • IKEA lists four individual charging channels for one to four batteries.
  • The charger itself uses a mains socket, so it's less suitable if you don't have a spare socket while charging.

Joybuy products

These product picks focus on rechargeable AA cells and USB-powered chargers. Before use, check that your label maker supports the battery size and chemistry.

Set of 8 rechargeable AA lithium batteries with USB-C charger

Set of 8 rechargeable AA lithium batteries with USB-C charger

Suitable for a label maker only if it supports rechargeable AA lithium cells.

The product name lists eight AA lithium batteries and a USB-C charger.

Check your label maker's manual for the permitted battery chemistry before using this set.

Joybuy
Aigostar Quick Battery Charger for 4 AA or AAA batteries, black

Aigostar Quick Battery Charger, 4 AA/AAA, black

A USB-powered option if your label maker supports rechargeable AA cells and you don't want to plug the charger into its own mains socket.

The product description lists four independent charging channels and a DC 5 V, 1 A USB input.

The description specifies rechargeable NiMH and NiCd cells. Check that the battery chemistry is also suitable for your label maker.

Joybuy

Frequently asked questions

Will an AA charger work with every label maker?

No, battery size varies by model. Brother's Dutch specifications list rechargeable AA batteries for the PT-P750W and AAA batteries for the PT-H110. Check the exact model and its manual before buying cells.

Can I put disposable AA batteries in a rechargeable battery charger?

No, don't use disposable batteries in the chargers described here. Panasonic specifically warns against charging dry-cell batteries in the BQ-CC87; GP lists disposable battery detection for the B441. Check the battery type before charging.

Can I use a USB-C charger with any adaptor?

Not without checking the requirements for the specific model. For the VARTA LCD Universal Charger+ 57688, VARTA specifies a Power Delivery adaptor of at least 9 V/2 A or 12 V/1.25 A, which is not included.

What should I check if batteries or an adaptor are missing?

Check what's included with the exact version and which cells and power supply your label maker and charger need. The GP ReCyko B441 version lists four AA cells as included; according to Panasonic, the Panasonic BQ-CC87 does not include a USB mains adaptor.