Who is this choice relevant to?

Model-maker with a small desk

You want to fit the printer on your desk without losing your model-making workspace. Compare the printer’s dimensions with its trays closed, and also check how much room the paper feed and output need when printing. For example, Canon Netherlands lists the PIXMA TS4150i’s dimensions with the trays closed as approximately 374 × 355 × 168 mm.

Builder working to scale

You want to print parts from a PDF at their intended size. Whether you need a larger sheet or can split the plan across several A4 sheets depends on the plan and your print settings. Adobe Acrobat offers options for tiling large pages across multiple sheets.

Regular plan printer

If you print regularly, you’ll want to weigh up cartridges and refillable ink based on how you use your printer. The Consumers’ Association includes ease of use and printing costs among its test criteria; a general claim about savings doesn’t necessarily tell you what’s right for your print volumes.

What should you look for?

Start with the largest paper size you actually need, then check the space required, print scale and expected ink use. That way, you won’t end up with a printer that fits on your desk but has too little room when it’s printing.

What to consider What should you check? Who should pay particular attention?
Desk space Check the dimensions of the exact model and see how much space the paper feed and output need. On a small desk, I don’t want to lose my workspace to the printer. Around 36% of consumers prioritise the space it takes up.
Scale and paper size Check the PDF page size, scale setting and a measurement line on a test print. If parts need to be the intended size, I want to know whether one sheet will do or whether I’ll need to print across multiple sheets. Around 29% of consumers give scale and paper size the highest priority.
Ink and running costs Estimate how many black-and-white and colour prints you’ll make, then compare cartridges and ink tanks on the same basis. If I print regularly, I want to factor in ongoing ink use, not just the choice of printer. Around 21% of consumers prioritise ink and running costs.
Creative materials Check which paper types and material thicknesses the exact model supports through its available feed. If I also want to print plans on suitable card, the feed needs to support it. Around 14% of consumers give colour and specialist materials the highest priority.

Common pitfalls

  • Comparing only the dimensions with the trays closed

    These measurements don’t show the full amount of space you’ll need when paper is fed from the rear or the output tray is open.

    Before buying, check how the printer will fit on your desk with the feed and output in use, especially if it will sit against a wall or under a shelf.

  • Automatically fitting a plan to the paper

    A setting that fits a PDF onto a smaller sheet can change the intended print size.

    Check the scale and measure a known dimension on a test print before cutting out any parts. Adobe Acrobat also lets you print larger documents across multiple sheets, with adjustable scale and overlap.

    A test print at the wrong scale could mean you need to use more paper and ink.

  • Confusing A3 printing with A3 scanning

    A printer may print in A3 while supporting a smaller size for scanning and copying.

    Epson says the ET-15000 prints in A3 through the rear feed, but scans and copies up to A4. Check each of these sizes separately for the model you’re considering.

  • Choosing based on the ink system alone

    Your actual ink use depends on what you print and how often. Inkjet printers also use ink for routine printhead cleaning.

    Compare cartridges and ink tanks based on the number and type of prints you expect to make. Canon says that inkjet printers use ink to clean the printheads during normal use.

    Remember to factor in replacement ink and the ink used during routine printhead cleaning.

Brands to compare

Canon

Canon offers both A4 and A3 models in its PIXMA range, to suit different paper sizes and desk layouts.

  • Canon Netherlands lists the A4 PIXMA TS4150i’s dimensions with the trays closed as approximately 374 × 355 × 168 mm.
  • The PIXMA TS9550a prints in A3 and measures approximately 468 × 366 × 193 mm with the trays closed; Canon lists five individual ink cartridges.
  • Dimensions with the trays closed don’t show how much space the feed and output need while printing.

Epson

Epson offers A3 ink tank models and an A3+ model with a feed for suitable specialist materials.

  • Epson says the ET-15000 prints in A3 through the rear feed; scanning and copying are supported up to A4.
  • Epson lists a straight paper feed for suitable materials up to 1.3 mm thick on the ET-8550.
  • The feed and paper you need should suit the space available and the materials you actually use.

Brother

The DCP-J1310DW is an A4 all-in-one for anyone printing plans and other documents in A4.

  • Brother lists a 150-sheet paper tray and automatic double-sided printing.
  • According to the Brother brochure, the supplied cartridges are rated for 200 pages in black and 200 pages in colour.
  • These specifications don’t make the DCP-J1310DW suitable for A3 printing; check the size supported by the exact model.

Joybuy product selection

This product selection is aimed at model-making plans that fit on A4; larger PDF plans can potentially be split across multiple sheets.

HP Smart Tank 7005 Wireless all-in-one colour printer

HP Smart Tank 7005 Wireless all-in-one colour printer

Suitable for A4 plans; you can split larger PDF plans across multiple sheets using Acrobat’s tiling option.

Maximum paper size: A4. Dimensions: 427,5 × 364 × 198,6 mm.

Wireless all-in-one model with automatic double-sided printing and a refillable ink system.

Joybuy

Frequently asked questions

Can I print a large model-making plan to scale on an A4 printer?

Yes, if your PDF and print settings allow it. Adobe Acrobat can split a large page across multiple sheets, with adjustable scale and overlap. Check the scale setting and measure a known dimension on a test print before cutting out any parts.

Does an A3 printer automatically have an A3 scanner too?

No, it varies by model. Epson says the ET-15000 prints in A3 through the rear feed, but scans and copies up to A4. Check the print, scan and copy sizes separately.

What can I do about streaks or missing lines?

For applicable EcoTank and Expression models, Epson recommends running a nozzle check and, if necessary, cleaning the printhead through the maintenance menu. Follow the instructions for your model and check the ink level before cleaning.

Who can help if a printer I bought in the Netherlands turns out to be faulty?

According to the Dutch government, the retailer is your first point of contact if a product is faulty. The retailer must offer an appropriate solution and cannot simply send you to the manufacturer; any additional manufacturer’s guarantee does not replace this right.

What are the rules for buying online and returning my old printer?

According to the Dutch government, when you buy from a business online you’ll often have a 14-day cooling-off period; check the terms that apply to your purchase. If you buy a new, similar appliance as a private individual, the old-for-new scheme also applies when returning your old electrical appliance, including for online purchases.