Who is this choice relevant to?

Student working with drawings to scale

You need to be able to read dimensions, the legend and fine lines at the chosen paper size. So decide on the format and required scale first. Autodesk Knowledge Network explains that setting a scale is different from fitting a drawing to the paper.

Student who prints multiple versions

You regularly print revised technical drawings and want to weigh the purchase against your ink and paper use. Epson describes ink tank models for A3 printing, but the stated capacity won’t tell you how much ink your own drawings will use.

Student with one desk

You want to print large drawings at home but have limited space, and may also need to scan documents. Check the space needed for the printer and paper feed, and look at the scan size separately. For example, Brother specifies A3 printing but A4 scanning and copying for the MFC-J5340DW.

What should you look for when choosing?

First check that the drawing can be printed legibly at the required size and scale. Then compare running costs, the space needed and scanning features.

A3(+) printer without a scanner

Choose this option: if you print digital drawings up to A3 or A3+ and don’t need to scan paper originals.

Bear in mind: there’s no scanner; with the Canon PIXMA iX6850, duplex printing is manual.

A3 ink tank printer

Choose this option: if you regularly print large batches of technical drawings and want to weigh the purchase against your own ink use.

Bear in mind: the stated page yield won’t directly predict the cost of printing an A3 drawing.

A3 all-in-one printer

Choose this option: if you want to copy or scan documents as well as print technical drawings.

Bear in mind: check the scan size for the exact model; it may not match the maximum print size.

Plotter or print service

Choose this option: if the drawing won’t fit on A3 without losing detail or changing its scale.

Bear in mind: compare the space you have and how often you expect to print with what a print service can offer.

What to consider What to look for Who is this important for?
Size and scale Check the source size, required scale, maximum print size and print margins. For work to scale, print a test copy with a reference measurement. I want labels and dimensions to remain legible, and the printout to be at the intended scale. Around 33% of consumers say size and scale are their main purchasing concern.
Running costs Compare the printer, expected number of A3 prints, compatible ink and paper over the same period. Don’t directly convert the stated page yield into a cost per drawing. If I print technical drawings often, I want to weigh the cost of the printer, ink and paper against my own usage. Around 27% of consumers prioritise total running costs.
Space needed Measure the available space, allowing room for extended trays and a large sheet of paper. The stated dimensions of the Canon PIXMA TS9550a are with the trays retracted. With limited space, I want to be able to position and use a printer without the paper feed or output getting in the way. Space is the main purchasing concern for around 27% of consumers.
Scanning Check the scan size, flatbed and document feeder separately for the exact model. I want to digitise paper drawings and need to know whether the scanner can handle the whole original in one go. Around 13% of consumers put scanning features first.

Common pitfalls

  • Automatically fitting a drawing when the scale needs to stay fixed

    The fit-to-page setting can change the relationship between the drawing and the paper. This could make a technical drawing unusable if it needs to be printed at a fixed scale.

    Set the required scale explicitly and check a measurement on a test print. Autodesk Knowledge Network distinguishes between setting a scale and fitting a drawing to the paper.

    An unusable printout may mean you have to print the drawing again.

  • Confusing A3 printing with A3 scanning

    The maximum sizes can vary by function. Brother specifies A3 printing but A4 scanning and copying for the MFC-J5340DW.

    Check the specifications for printing, the flatbed and the document feeder separately. If the scan size is too small, you may need a separate scanning solution.

    You may need additional scanning equipment for paper originals that won’t fit on the scanner.

  • Looking only at the stated ink yield

    The stated yield of an ink tank printer won’t tell you how much ink your drawings will use. If you print infrequently, the printer may also use ink for cleaning cycles; the Consumers’ Association describes this for inkjet printers.

    Compare costs based on your own print size, colour coverage and printing frequency. Follow the chosen model’s manual for maintenance.

    As well as ink, factor in large-format paper and, if you print infrequently, possible ink use for cleaning.

Brands to consider

Canon

Canon offers examples of both A3+ printing without a scanner and A3 printing with scanning and copying features.

  • Canon specifies five individual inks and printing up to A3+ (329 × 483 mm) for the PIXMA iX6850.
  • Duplex printing is manual on the PIXMA iX6850. The stated dimensions of the PIXMA TS9550a are with the trays retracted; also check the space needed for use and the scan size.

Epson

Epson offers A3 ink tank models for regular printing, as well as a separate 24-inch plotter option for larger technical drawings.

  • Epson describes the EcoTank ET-14100 as an A3 ink tank printer. The ET-15000 adds A4 multifunction tasks and can print on A3 via the rear feed.
  • Stated tank yields are manufacturer specifications and won’t tell you what your drawings will cost to print. Also check current availability and consumables.

Brother

The MFC-J5340DW is an all-in-one option for A3 printing as well as scanning and copying.

  • Brother specifies printing up to A3 for this model.
  • Brother specifies scanning and copying up to A4. Check other models separately if you want to digitise larger paper originals.

HP

HP offers both an all-in-one model for A3 printing and scanning, and a separate plotter option for larger technical jobs.

  • HP lists A3 printing and an A3 flatbed scanner for the OfficeJet Pro 9730. According to HP, the DesignJet T250 2025 edition supports sizes from A4 to A1.
  • With a plotter, you’ll need to check separately that you have enough space and that it’s suitable for your prints.

Products on Joybuy

Related products will be available soon.

Frequently asked questions

How can I make sure a technical drawing prints at the right scale?

Set the required scale when printing and check a measurement on a test print. Autodesk Knowledge Network distinguishes between setting a scale and fitting a drawing to the paper, which adjusts it to the selected paper size.

Can every A3 all-in-one printer scan A3 sheets?

No, it varies by model and function. Brother specifies A3 printing but A4 scanning and copying for the MFC-J5340DW, so check the flatbed and document feeder on the exact model.

Does it make sense to have a printer at home if I only need a large technical drawing occasionally?

Compare how many prints you expect to need with the cost of a print service before choosing a printer. Leiden University confirms that it offers a printing service for its students, but this doesn’t confirm that your institution offers the large format you need.

What should I consider if I don’t use an inkjet printer often?

Factor in maintenance and possible ink use for printhead cleaning. The Consumers’ Association describes the risk of clogging and cleaning when you print infrequently; follow the chosen model’s manual for maintenance.