Printing diagrams at a small desk
You want to print A3 diagrams but have limited room for the paper feed and output tray. Canon, Epson and HP's specifications show why you should also allow for the space around the printer.
Choose an A3 printer based on the space taken up by the paper feed and output tray while printing, not just the size of the printer when closed. A3 printing does not automatically mean A3 scanning: the Epson EcoTank ET-15000 and Brother MFC-J5340DW scan up to A4, while the HP OfficeJet Pro 9730 is listed as supporting A3 scanning. For drawings with fixed dimensions, set the intended print scale and check it with a test print.
You want to print A3 diagrams but have limited room for the paper feed and output tray. Canon, Epson and HP's specifications show why you should also allow for the space around the printer.
You print diagrams or technical drawings where paper size and print scale matter. Autodesk explains that fitting a drawing to the paper can change its scale.
You want to scan documents as well as print them. Check separately whether you need A4 or A3 scanning, as scanning capabilities vary by model.
Best if: you mainly print digital diagrams and do not need a built-in scanner. The Canon PIXMA iX6850 supports A3+ and does not have a scanner.
Trade-off: you will need another way to scan documents; duplex printing on this Canon model is manual.
Best if: you want to print in A3 and scan A4 documents. The Epson EcoTank ET-15000 and Brother MFC-J5340DW support both formats.
Trade-off: Epson uses a rear feed for A3 paper, while Brother has an A3 paper tray. Both models scan up to A4.
Best if: you also want to digitise paper A3 diagrams in full. HP lists the OfficeJet Pro 9730 as supporting both A3 printing and A3 scanning.
Trade-off: HP gives minimum dimensions of 581 × 467 × 386 mm, excluding the extended output tray and cleaning flap, so measure the space with the printer in use too.
| What to consider | What should you check? | Who needs to consider this? |
|---|---|---|
| Space when in use | Measure the space with the paper feed and output tray in use. Epson lists a rear feed for the ET-15000; HP gives the OfficeJet Pro 9730's minimum dimensions excluding extended parts. | If I have limited desk space, I want to know whether the printer will fit with the paper feed and output tray in use. Around 36% of consumers give priority to the space needed in use. |
| Legibility and scale | Check the paper size, margins and scale setting; Autodesk explains that fitting a drawing to the paper can change its scale. | With a technical drawing, I want to be able to read the details and keep measurements to scale. Around 29% of consumers prioritise paper size and scale settings. |
| Ink use | Compare the suitable ink type with your own printing habits. The Consumers' Association notes that when you print infrequently, a relatively large amount of ink can be used for cleaning. | I want to weigh up ongoing ink costs against how much I print. Around 21% of consumers prioritise the running costs of ink. |
| Scanning size | Check the scanning size separately from the print size. Epson and Brother list A4 scanning, while HP lists A3 scanning for the OfficeJet Pro 9730. | If I want to digitise paper A3 originals, the scanner needs to handle the whole document. Around 14% of consumers give scanning capabilities top priority. |
The paper feed and output tray may need extra space. The Epson ET-15000 feeds A3 paper from the rear; HP's minimum dimensions for the OfficeJet Pro 9730 exclude extended parts.
Measure the space with the feed and output tray in the position you will use when printing.
You may need a different place to set it up or extra workspace.
The Epson ET-15000 and Brother MFC-J5340DW print in A3, but their listed scanning capabilities are for A4. That is not enough if you want to digitise a paper A3 original in full.
Compare the maximum sizes for printing, scanning and copying separately. If you want to scan A3 originals, check that your chosen model supports this size.
If the printer only scans A4, you may need a separate scanning solution for A3 originals.
Autodesk explains that fitting a drawing to the paper can change the relationship between the drawing and the print. As a result, the print may not be at the intended scale.
Set the scale you need and check a known measurement on a test print.
If the scale changes unintentionally, you may need to print the drawing again.
The Consumers' Association notes that when you print infrequently, a relatively large amount of ink can be used for cleaning. HP also lists chip requirements for compatible cartridges for the OfficeJet Pro 9730.
Check the consumables and any chip requirements for the exact model, then weigh them up against your own printing habits.
Factor in ongoing ink costs and any ink used for cleaning when making your choice.
The PIXMA iX6850 is an A3+ printer without a scanner.
The EcoTank ET-15000 combines A3+ printing via a rear feed with A4 scanning and refillable ink tanks.
The MFC-J5340DW prints in A3 from a paper tray and also scans and copies in A4.
The OfficeJet Pro 9730 is designed for those who want to print and scan in A3.
No. A3 printing does not automatically mean A3 scanning. The Epson ET-15000 and Brother MFC-J5340DW can print in A3, but their listed scanning capabilities are for A4. HP also lists A3 scanning for the OfficeJet Pro 9730; the Canon PIXMA iX6850 does not have a scanner.
Set the intended scale and check a known measurement on a test print. Autodesk explains that fitting a drawing to the paper can enlarge or reduce it, changing the scale.
Keep the paper feed and output tray for your chosen model accessible, and follow the instructions for that model. The Consumers' Association notes that when you print infrequently, a relatively large amount of ink can be used for cleaning; consider your own printing habits when choosing an ink system.
According to the Dutch government, the seller must provide a solution if a product is faulty. There is no fixed statutory guarantee period for all products in the Netherlands; a manufacturer's warranty is separate from your legal rights.
According to the Dutch government, online distance purchases from a business often come with a 14-day cooling-off period. Check the terms that apply to your purchase; the example described does not apply to an online purchase from a private seller.