Who is this relevant for?

Scale-conscious model maker

You use printed parts or measurement lines as working references and want to make sure the paper size or print settings don’t change the intended scale. Autodesk Support explains the page-scaling setting, while Consumentenbond provides information about A3 paper size.

Model maker with paper plans

You want to do more than print existing large drawings: you also want to scan or copy them. Brother and Epson list scanning capabilities for each model, so check the scan size separately.

Regular colour printer user

You often print plans with colour areas or illustrations and want to factor in the right ink and refillable systems. Epson describes the ET-8550’s ink configuration, while Consumentenbond points out that when you print infrequently, a relatively large amount of ink can be used for cleaning.

What should you look for when choosing?

Key consideration What to look for Who is it most important for?
Paper size and scale Check that A3 is available as a print size, and check the file’s page size and scale setting. For the PDF issue described, Autodesk Support recommends ‘Actual Size’ or no page scaling. If I use parts or measurement lines as working references, I want a known measurement to be accurate on the printout. Around 36% of consumers prioritise accurate A3 printing at scale.
Scanning A3 plans Check the maximum print size, flatbed size and feed-scanning size separately. Brother specifies A3 scanning for the MFC-J6960DW. If I have paper A3 drawings that I want to digitise in full, scan size is decisive. Around 29% of consumers give A3 scanning top priority.
Ink and frequency of use Compare the ink for the exact model and consider how often you print. Consumentenbond notes that if you use an inkjet printer very infrequently, a relatively large amount of ink can be used for cleaning. If I print regularly and want to factor in ink choice, I compare refillable ink with cartridges for my needs. Around 21% of consumers prioritise running costs.
Space and occasional use Measure the space available, including room for paper input and output, and choose additional features to suit how often you’ll use them. If I only print occasionally, I don’t want an unnecessarily large set-up or features I’ll hardly use. Around 14% of consumers prioritise space and occasional use.

Common buying mistakes

  • Confusing ‘Fit to page’ with printing to scale

    Automatically fitting a plan to the page can shrink it, even if the drawing looks right on screen. A printout at the wrong scale may not be suitable as a working reference.

    Check the source file, select the intended A3 size and set the scale carefully. Measure a known dimension on a test print.

    A failed test print can waste paper and ink.

  • Assuming A3 printing means A3 scanning

    Print and scan sizes can differ, even on all-in-one printers. An A3 plan won’t fit in a scanner that supports A4 at most.

    Check both the maximum print size and scan size for the exact model.

    If you want to digitise paper A3 plans later, you may need a different scanning solution.

  • Focusing only on the stated photo yield

    Epson’s stated photo yield doesn’t tell you how many model-making drawings you can print. How often you print also matters: with infrequent inkjet use, ink can be used for cleaning.

    Compare the consumables for the exact model with your expected usage; don’t use photo yields as a guide to how many plans you’ll be able to print.

    With occasional use, ink used for cleaning can also add to the cost.

Brands to consider

Canon

The PIXMA iX6850 is an A3+ printer without a built-in scanner, for anyone who mainly prints digital plans.

  • Canon specifies A3+ printing and five separate inks for this model.
  • This model only prints; its ink configuration alone doesn’t indicate how many model-making plans it can print.

Brother

The MFC-J6960DW is an A3 all-in-one for anyone who also wants to scan or copy paper A3 plans.

  • Brother specifies A3 printing, scanning and copying for the MFC-J6960DW.
  • Scan size varies by model: Brother specifies A3 printing but A4 scanning for the MFC-J5740DW.

Epson

The WorkForce WF-7840DTWF is a document-focused A3+ all-in-one, while the EcoTank ET-8550 is a separate model designed for high-volume colour printing.

  • Epson specifies printing and scanning up to A3 for the WF-7840DTWF, and A3+ printing with refillable six-colour ink for the ET-8550.
  • Epson’s stated photo yield is not an independent measure of how many model-making plans you can print.

HP

The OfficeJet Pro 9730 combines A3 printing with A3 scanning.

  • HP specifies A3 printing and an A3 flatbed scanner for the OfficeJet Pro 9730.
  • HP lists dynamic cartridge security for this model, so check which replacement cartridges are compatible with your choice. The 9730 and 9730e are different models.

Joybuy products

This selection focuses on A3 printing, with the option to scan or copy paper A3 plans.

Brother MFC-J6760DW A3 inkjet printer

Brother MFC-J6760DW A3 inkjet printer

A good choice if you want to print A3 plans and scan or copy paper plans in A3 format.

Specifications: A3 printing, scanning and copying; automatic double-sided printing; 1200 × 4800 DPI; 31 ppm; Wi-Fi.

View at Joybuy

Frequently asked questions

How can you stop a model-making plan printing at the wrong scale?

Check the scale in the source file, select the intended paper size and avoid ‘Fit to page’ if the scale must remain exact. For the PDF issue described, Autodesk Support recommends ‘Actual Size’ or no page scaling. For an important plan, check a known measurement on the printout.

Can every A3 all-in-one scan an A3 plan?

No, scan size varies by model. Brother specifies A3 printing but A4 scanning for the MFC-J5740DW, and A3 scanning for the MFC-J6960DW. So check the scanning and printing capabilities separately for the exact model.

What should you consider if you only print occasionally?

Consider how often you print and which ink the printer uses. According to Consumentenbond, if you use an inkjet printer very infrequently, a relatively large amount of ink can be used for cleaning. A stated photo yield won’t necessarily give you an estimate of the cost of printing model-making plans.

What warranty are you entitled to as a private printer buyer in the Netherlands?

There is no fixed statutory two-year warranty period in the Netherlands, but you are entitled to a product that meets reasonable expectations. According to Rijksoverheid, the retailer is your point of contact if something goes wrong. What you could reasonably expect from the product and how it has been used are taken into account when assessing your claim.

Can you always return a printer bought online within 14 days?

Not always. According to Rijksoverheid, purchases made at a distance often come with a 14-day cooling-off period, but there are exceptions. Check who the seller is and what information applies to your purchase regarding the cooling-off period and returns.