Who is this choice relevant to?

Illustrator with limited desk space

Wants to print invitations at home on A3 or A3+ and needs to fit the printer, paper feed and output area into a small workspace.

Card maker using specialist paper

Prints artwork on their chosen card or photo paper and wants to check that the size, media type and feed are suitable.

Regular invitation printer

Prints batches regularly and wants to weigh up the cost of the printer, paper and ink together; standard page yields are not the same as the ink used for a design of your own.

What should you look for?

First check your paper and the space available. Then compare extra features and the cost of printing recurring batches.

What to consider What should you check? Who is this important for?
Print quality for artwork Check the supported size and whether borderless printing is available at that size. If necessary, print a test copy of your design. If the artwork needs to go right to the edge, I want to know whether that’s possible at my chosen size. Around 29% of consumers looking for an A3 printer for this purpose prioritise the printing options.
Space while in use Measure the available space and check how much room is needed for open trays, the rear feed and printed sheets. With limited desk space, I want to know how much room the printer takes up while printing, not just how big it is when closed. Around 29% of consumers in this situation prioritise the space needed during use.
Invitation paper Compare the size and paper type with the specified feed options. Also check whether duplex printing at that size needs to be done manually. If I want to use a particular card paper, the size, thickness and feed need to be suitable. Around 24% of consumers looking for a printer for this task prioritise paper handling.
Costs for your own print volume Compare the printer, replacement ink and paper costs for the same batch size and design. For regular batches, I want to budget for ink and paper in advance, even if my designs use lots of colour. Around 18% of consumers who print invitations prioritise the cost of printing a batch.

Common purchasing mistakes

  • Measuring only the printer when it’s closed

    The dimensions with the trays closed don’t tell you how much space is needed for paper input and output. Allow for the rear feed and A3 sheets while printing, too.

    Measure the printer’s full operating setup where you plan to put it.

  • Assuming A3 support means every type of card paper is supported

    Manufacturers specify media, feed methods and duplex printing for each model and size. So an A3 label doesn’t automatically confirm that a particular type of card or an A3 duplex job is supported.

    Compare the specifications with the size and thickness of your paper, and check how duplex printing works.

  • Converting ink yield directly into the number of invitations

    Canon bases the stated yields for the PIXMA iX6850 on standardised A4 documents or 10 × 15 cm photos. The Consumers’ Association (Consumentenbond) points out that maintenance ink also counts when you print infrequently.

    Compare ink and paper costs for the same batch size and design; don’t treat a standard yield as the cost of printing each A3 invitation.

  • Overlooking cartridge conditions

    HP states that the OfficeJet Pro 9730e has dynamic security that can block cartridges with a non-HP chip. Firmware updates may affect compatibility.

    Check the cartridge conditions for the exact model variant before choosing this printer.

Brands to compare

Canon

The PIXMA iX6850 is an A3+ printer without a scanner; the PIXMA PRO-200S is a separate A3+ model designed for photo printing.

  • Canon specifies borderless printing on sizes including A3 and A3+ for the iX6850.
  • Duplex printing on the iX6850 is manual. The stated dimensions of the PRO-200S are 639 × 379 × 200 mm with the trays closed; also allow for the space it needs in use.

Epson

The EcoTank ET-8550 combines A3+ photo printing with refillable ink tanks, scanning and copying.

  • Epson specifies an A3+ rear feed for specialist media and a straight paper path for suitable media up to 1.3 mm thick.
  • A photo yield stated by Epson isn’t a cost estimate for illustrated invitations; work out the usage for your own print run.

Brother

The MFC-J5340DW is a multifunction colour inkjet printer with A3 printing and A4 scanning and copying.

  • Brother specifies an A3 paper tray and a manual feed slot for one sheet at a time.
  • The automatic duplex printing specification applies to A4, not A3.

HP

According to HP, the OfficeJet Pro 9730e can print and scan up to A3.

  • A3 printing and scanning may be useful if you also need to handle documents in that size as well as invitations.
  • HP states that its dynamic cartridge security can block certain cartridges without an HP chip; firmware updates may affect compatibility.

Joybuy product selection

This selection is for anyone who wants to combine A3 printing with scanning or copying.

Brother MFC-J6760DW multifunction A3 inkjet printer

Brother MFC-J6760DW multifunction A3 inkjet printer

For anyone who wants to print A3 invitations and also scan or copy.

The product information lists A3 colour printing, automatic duplex printing and paper media up to 220 g/m².

Stated specifications: 1200 × 4800 dpi, 31 ppm and Wi-Fi. The safety instructions specify connection to a 220–240 V AC wall socket.

Joybuy

Frequently asked questions

Is an ‘A3 printer’ enough to print invitations without a white border?

No. Check that borderless printing is supported for the exact size you need. Canon lists this for the PIXMA iX6850 on sizes including A3 and A3+; this model specification doesn’t automatically apply to every printer or type of media.

Can I print A3 invitations automatically on both sides?

It depends on the model and size. Canon specifies manual duplex printing for the PIXMA iX6850; Brother lists automatic duplex printing for the MFC-J5340DW up to A4. Check the setting for your chosen model and print a test copy in the correct orientation first.

What are my rights when I buy a printer online?

The Dutch Government (Rijksoverheid) states that, in many cases, a 14-day cooling-off period applies to distance purchases from a business, which must inform you about it. Check the terms of your specific purchase; this information isn’t a promise about returns of used ink or personalised printed materials.

Can I return an old appliance when I buy a new printer?

According to the Dutch Government (Rijksoverheid), when you buy a new appliance of a similar type, the shop must take back your old one. The government also outlines ways to return or send in an old appliance after an online purchase.