Who is this guide for?

Diagram makers who want to preserve scale

If you print patterns, plans or diagrams, check whether the file requires A3 (297 × 420 mm) or A3+ (329 × 483 mm). Consumentenbond describes these paper sizes, while Autodesk Support recommends, among other things, setting the plot scale to 1:1 and turning off ‘Fit to paper’ for an AutoCAD layout.

Regular A3 printers

If you often print large diagrams, compare the printer, compatible ink refills and paper based on how you’ll use them. Canon Nederland and Epson Nederland describe different cartridge systems and ink tanks, while Consumentenbond includes print costs in its printer tests.

People who want to digitise paper drawings

If you also want to scan existing large drawings, check the scan size supported by the exact model. Brother specifies A3 printing but A4 scanning for the MFC-J5740DW; Epson Nederland says the WorkForce WF-7840DTWF can scan up to A3.

What should you look for when buying?

What to consider What should you check? Who is this important for?
Paper size and scale Check the required size, margins and scale setting in your software. Consumentenbond lists A3 as 297 × 420 mm; Canon Nederland specifies A3+ at 329 × 483 mm for the PIXMA iX6850. If I need a pattern or plan printed at its intended size, I want to avoid the file being scaled down without me noticing. Around 36% of consumers prioritise scale and legibility.
Ink and paper for repeat printing Compare the printer and compatible refills with your expected usage and A3 paper. Epson and Canon provide different ink and page-yield figures; standard pages or photos are not the same as your diagrams. If I regularly print large files, I want to factor refills and paper into my choice. Around 29% of consumers prioritise ongoing printing costs.
A3 scanning Check the maximum scan size of the flatbed and, if included, the document feeder separately. Brother specifies A4 scanning for the MFC-J5740DW; Epson says the WF-7840DTWF can scan up to A3. If I want to digitise A3 paper originals, the scanner needs to handle the whole sheet. Around 21% of consumers prioritise digitising large originals.
Space and features Measure the available space, allowing enough room for paper input and operation. Compare a printer-only model with a multifunction model based on the features you’ll actually use. If I only print occasionally and plan to put the printer in a hobby room, I want a setup that fits the space available. Around 14% of consumers prioritise space and ease of use.

Common buying mistakes

  • Confusing ‘fits on A3’ with printing at the intended scale

    A setting that scales the content to fit can change the chosen plot scale.

    Check the print preview and scale setting. For an AutoCAD layout, Autodesk Support recommends setting the scale to 1:1 and turning off ‘Fit to paper’; this guidance applies specifically to that workflow.

    A failed print can waste extra paper and ink.

  • Assuming A3 printing means A3 scanning

    A printer may print A3 while its scanner only handles smaller originals. Brother specifies A4 scanning for the MFC-J5740DW.

    Check the scan sizes supported by the flatbed and any document feeder separately. Epson says the WF-7840DTWF can scan up to A3.

  • Using page-yield figures to calculate the cost of each diagram

    Yield figures for standard pages or photos don’t automatically apply to large diagrams.

    Compare compatible refills and paper with your own files and usage. Keep the stated yield definition separate from your actual A3 ink consumption.

  • Assuming any compatible cartridge will work

    HP says the OfficeJet Pro 9730 has dynamic cartridge security, which can block cartridges with a non-HP chip.

    Before buying, check the cartridge requirements for the exact printer model and refill in question.

Brands to compare

Canon

The PIXMA iX6850 is an option if you want to print large files without needing a scanner.

  • Canon Nederland specifies A3+ printing, five individual inks, Wi-Fi and Ethernet for this model.
  • This model is for printing only; Canon says it offers manual duplex printing.

Epson

Relevant models include A3+ ink-tank printers and multifunction models with A3 scanning.

  • Epson Nederland specifies A3+ printing with pigment inks for the EcoTank ET-16150 and A3 scanning for the WorkForce WF-7840DTWF.
  • The EcoTank ET-8550 is designed for photos; photo yield figures don’t measure ink consumption for your diagrams.

Brother

The MFC-J5740DW is an A3 all-in-one printer for home or office use.

  • Brother specifies two A3 paper trays for this model.
  • Brother lists A4 as the maximum scan and copy size, even though the model can print A3.

HP

The OfficeJet Pro 9730 is an A3 print-and-scan option if you also work with large paper originals.

  • HP specifies an A3/tabloid flatbed scanner for this model.
  • HP says the model has dynamic cartridge security, so check that refills are compatible with this exact model.

Joybuy printer picks

Related products coming soon.

Frequently asked questions

Can I scan an A3 drawing with any A3 all-in-one printer?

No, scan size varies by model. Brother specifies A3 printing but A4 scanning for the MFC-J5740DW; Epson says the WF-7840DTWF can scan up to A3. Check the scan size and document feeder for the exact model separately.

How can I stop a diagram printing at the wrong scale?

Check the paper size, print preview and scale setting in the software you’re using to print the file. For an AutoCAD layout, Autodesk Support recommends setting the plot scale to 1:1 and turning off ‘Fit to paper’; this guidance doesn’t automatically apply to other files.

What should I check when setting up a printer?

Check the manual and the ink supported by the exact model. Canon Nederland lists specific cartridge codes for the PIXMA iX6850 and provides manuals and drivers for this model.

Does an extra retailer or manufacturer’s warranty automatically give me more rights?

Not automatically. According to the Rijksoverheid, you’re entitled to a product that works as it should, and the retailer is your point of contact if something goes wrong. There is no fixed statutory warranty period for every printer in the Netherlands. Compare the terms of any additional warranty with your statutory rights.

What should I do with a printer I no longer need in the Netherlands?

According to the Rijksoverheid, when buying a new, similar appliance, a private buyer can return the old one to the retailer free of charge, including with an online purchase. Your local recycling centre is another option. The old-for-new scheme doesn’t apply to business equipment.