Who is this relevant to?

For makers using specialist card stock

You want to print on a particular type or thickness of paper. So compare your paper with the support and feed path of the exact model, as the specifications from Canon and Epson show.

For makers with a small desk

You need room not just for the printer, but also for paper input and the output tray. For example, Canon’s dimensions for the TS9550a are given with the trays retracted.

For makers who print in colour frequently

You want to match your ink costs to your own printing habits. The Consumentenbond points out that even occasional printing can involve ink used for maintenance.

What should you look for?

Start with the paper you actually want to use. Then measure the space you’ll need, before comparing the features and costs that suit your printing habits.

What to consider What should you check? Who is this important for?
Suitability for card stock Compare the size, type and thickness of your paper with the specifications and feed path for the exact model. If I need a particular type or thickness of paper, I want to know whether it will feed through the correct path. Around 31% of consumers are most concerned about paper compatibility.
Space while printing Allow for paper input, open trays and output as well as the printer’s footprint when closed. On a small desk, the printer needs to fit with paper in place too. Available workspace is the main priority for around 25% of consumers.
Ink costs Think about how often you expect to print and check which ink or cartridges the model uses. If I print in colour regularly, I want to factor in the ongoing costs for the way I use it. Around 19% of consumers focus mainly on recurring printing costs.
Finishing and double-sided printing Check which sizes each model can print borderless and automatically on both sides. If I want a design printed right to the edge or on both sides, I need to know what finish is possible on my paper. Around 13% of consumers start with the finish they want.
Scanning and copying Decide whether you need these features and check the maximum size supported by each one. If I also want to digitise paper originals, I need more than just a printer. Around 12% of consumers choose mainly based on extra features.

Common buying mistakes

  • Assuming the maximum weight applies to all card stock

    Canon’s specification of up to 300 g/m² for the PIXMA iX6850 applies to specific PT-101 photo paper; that figure does not automatically apply to other card stock.

    Before buying paper, check whether the type you want is supported and which feed path it uses.

    Unsuitable paper can lead to wasted paper and ink.

  • Measuring only the printer when it’s closed

    The stated dimensions for the Canon PIXMA TS9550a are with the trays retracted, while the Epson ET-8550 has a rear feed for A3+ paper.

    Also measure the space needed for paper input and output while printing.

  • Confusing A3 printing with A3 scanning or double-sided printing

    Brother specifies scanning and copying up to A4, and automatic double-sided printing up to A4, for the MFC-J5340DW.

    Check the maximum size for each feature separately.

  • Comparing only the purchase price

    How often you print affects running costs; HP also lists conditions relating to cartridge protection.

    Compare ink or cartridge costs and any conditions with your own printing habits.

Brands to compare

Canon

The PIXMA iX6850 and PIXMA TS9550a suit different needs, whether you’re looking for a straightforward A3 printer or one with extra features.

  • Canon specifies printing up to A3+ for the iX6850; the TS9550a offers A3 printing and scanning features.
  • The stated 300 g/m² for the iX6850 applies to specific Canon PT-101 photo paper. The TS9550a dimensions are given with the trays retracted.

Epson

The EcoTank ET-8550 is an A3+ photo printer with ink tanks and a feed for specialist media.

  • Epson specifies a rear feed for card and specialist media, as well as a straight-through feed for suitable media up to 1.3 mm thick.
  • These feed specifications do not guarantee suitability for every type of card stock. Check your material and leave space behind the printer.

Brother

The MFC-J5340DW is an office-focused A3 all-in-one for anyone who wants to print documents as well as card inserts.

  • Brother specifies an A3 paper tray and a manual single-sheet feed.
  • According to Brother, scanning, copying and automatic double-sided printing are limited to A4. These features do not confirm that a particular type of card stock is suitable.

HP

The OfficeJet Pro 9720e is an A3 all-in-one worth comparing if you also want office features.

  • HP lists A3 printing, scanning and copying features.
  • HP lists dynamic cartridge protection, which may block cartridges without a new or reused HP chip. Also check separately whether the printer is suitable for your card stock.

Joybuy products

Joybuy printer options for A3 colour printing and features such as scanning and copying.

Brother MFC-J6760DW A3 multifunction inkjet printer

Brother MFC-J6760DW A3 multifunction inkjet printer

A good fit if you want to combine A3 colour printing with scanning and copying. Before you buy, check that your card stock is suitable for this exact model.

Specifications in the product name: 1,200 × 4,800 dpi, 31 ppm and Wi-Fi.

Joybuy

Frequently asked questions

Can I use any paper sold as card stock?

No. Don’t assume it will work just because it’s labelled A3, or because a maximum weight is listed for a different type of paper. For example, Canon specifies plain paper from 64–105 g/m² and specific Canon PT-101 photo paper up to 300 g/m² for the iX6850. Epson describes separate feed paths for specialist media; compare your paper with the specifications for the exact model.

How do I set up a printer on a small desk?

As well as the printer itself, measure the space needed for paper input and output, and access to the ink or cartridges. The Canon TS9550a dimensions are given with the trays retracted; the Epson ET-8550 has a rear feed for A3+ paper.

How does printing occasionally or often affect my ink costs?

The Consumentenbond points out that inkjet printers may use ink for maintenance when used infrequently. If you print more often, the cost of refills or cartridges becomes more important to consider. Compare costs based on your own use, and don’t treat page yields for standard documents as measured costs per card insert.

Who can I contact in the Netherlands if my printer is faulty?

For a consumer purchase, you can contact the retailer to find a solution. According to the Dutch government, the Netherlands has no fixed statutory warranty period; what matters is what you can reasonably expect from the product.