Designer printing to scale
You want to check dimensions and small annotations on paper A3 plans. Autodesk Support recommends checking the scale settings and turning off the fit-to-page option when you need to print at the intended scale.
For architectural plans, a printer that genuinely prints in A3 is a sensible starting point. You should also check that the PDF will print at the intended scale. Choose A3 scanning only if you want to digitise paper A3 plans. If you print regularly, factor in ink, paper and how often you expect to use the printer.
You want to check dimensions and small annotations on paper A3 plans. Autodesk Support recommends checking the scale settings and turning off the fit-to-page option when you need to print at the intended scale.
You want to do more than print existing A3 drawings; you may also want to scan or copy them. Check the maximum scan size separately from the print size.
You regularly print revisions or multiple copies, so you want to weigh the upfront cost against paper and ink use for the way you plan to use the printer.
Best for: printing digital plans when you don’t need to scan paper originals.
Bear in mind: there’s no built-in scanning or copying function. With the Canon PIXMA iX6850, duplex printing is manual.
Best for: printing A3 plans but only needing to scan documents up to A4 size.
Bear in mind: Brother says the MFC-J5340DW scans up to A4, so A3 printing doesn’t automatically mean A3 scanning.
Best for: digitising or copying paper A3 plans in one go. Epson specifies A3 scanning for the WorkForce WF-7830DTWF.
Bear in mind: also check how much space you’ll need and which consumables the exact model uses.
Best for: printing plans and revisions often, and weighing the upfront cost against your own usage.
Bear in mind: Epson’s stated yield for replacement ink isn’t a measured figure for printing A3 architectural plans. Even with infrequent use, an inkjet printer may use ink for cleaning.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Scale and legibility | Check A3 support, the scale setting and the printable area. Measure a known dimension on a test print. | I want dimensions and small annotations on my plan to remain legible. Around 42% of consumers prioritise scale and legibility. |
| Ongoing printing costs | Compare paper and compatible ink based on how many A3 prints you make, your use of colour and how often you print. | If I print lots of plan revisions, I want to factor in recurring consumables as well as the purchase price. Around 25% of consumers prioritise the cost of repeated printing. |
| Scanning A3 plans | Check the scan size of the flatbed and any document feeder separately. Also check the copying function. | I want to digitise paper A3 originals in one go. Around 17% of consumers have A3 scanning as their main requirement. |
| Infrequent use and space | Measure the space with the trays open and check the connections. Bear in mind that ink may be used for cleaning when the printer is used infrequently. | In a small hobby room, I want to know whether the printer will fit with the paper feed and output tray open, and whether it will connect to my workstation. Around 16% of consumers prioritise this combination of space and occasional use. |
Automatic scaling can change the size of an otherwise correct PDF on paper, meaning the dimensions may no longer match.
Use the intended scale setting and measure a known dimension on a test print before printing the plan.
A test print that can’t be used may waste extra paper and ink.
The Brother MFC-J5340DW prints up to A3, but Brother specifies scanning up to A4. This means you can’t scan a paper A3 original at A3 size with this model.
Compare the maximum scan and copy sizes of the exact model if you want to digitise paper plans.
If you need to scan A3 originals, you may need a separate scanning solution.
A standard yield or manufacturer’s estimate won’t necessarily predict how much ink you’ll use for your A3 plans. Paper, replacement ink and cleaning can all add to the cost.
Estimate how you’ll use the printer and compare consumables under the conditions specified for the exact model.
An inkjet printer may use ink for cleaning cycles when used infrequently.
HP states that the OfficeJet Pro 9730 has dynamic security that may block cartridges without an HP chip. This applies to this specific model.
Before buying, read the cartridge terms for the exact printer and check which consumables are compatible.
Epson offers models for A3 printing and scanning, as well as a refillable ink tank option for A3+ printing.
The Brother models mentioned differ in the scan size available alongside A3 printing.
The PIXMA iX6850 is an A3+ printer for digital plans when you don’t need a scanner.
The OfficeJet Pro 9730 offers A3 printing and scanning for anyone who also wants to work with paper plans.
Check the paper size and scale settings in both the source file and the PDF reader. For scale problems, Autodesk Support recommends, among other things, turning off ‘Fit to paper’ and checking the print at actual size. Measure a known dimension on a test print. These settings won’t automatically correct a drawing that was originally scaled differently.
No, scan sizes vary by model. Brother specifies A3 printing and scanning up to A4 for the MFC-J5340DW, while Epson specifies A3 scanning for the WorkForce WF-7830DTWF. Check printing and scanning separately.
That depends on how many prints you make, your use of colour, the paper and ink you choose, and how often you print. The Dutch Consumers’ Association (Consumentenbond) points out that inkjet printers may use ink for cleaning when used infrequently. A stated yield for documents doesn’t automatically indicate the cost of printing your A3 architectural plans.
According to the Dutch government, you should contact the seller to claim your statutory guarantee. The Netherlands doesn’t have a fixed statutory two-year guarantee period; what you can expect from a product depends on factors including the product itself and the information provided at the time of sale.