Who is this choice relevant to?

Designer with a small desk

You print digital A3 plans and need to fit the printer, paper input and output on your workspace. Canon Netherlands lists the PIXMA TS9550a’s dimensions with its trays retracted. You should also measure the space you’ll need while printing.

Draftsperson printing to scale

You want an architectural drawing printed on the intended paper size and at the correct scale. Autodesk distinguishes between a precise plot scale and ‘Fit to Paper’, which adjusts the drawing to fit the paper.

Office digitising plans

You want to scan paper A3 plans as well as print in A3. Epson lists A3 scanning for the WorkForce WF-7840DTWF; Brother lists A4 scanning for the MFC-J5740DW.

What should you look for in an A3 printer?

What to consider What should you check? Who is this important for?
Scale and paper size Check A3 support, the selected plot scale and a test print. Don’t rely on ‘fit to page’ without checking the result. I want to print an architectural drawing at the intended scale, so I check the paper size and plot settings. Around 34% of consumers put scale and size first.
Space while in use Measure more than just the printer itself. Allow space for paper input and output, and check whether A3 paper is fed in from the rear. With a small desk, I want to make sure there’s enough room when paper is fed in and printed pages come out. Around 33% of consumers prioritise the space needed for the printer.
A3 scanning If you want to digitise paper A3 plans, check the maximum scan size separately from the maximum print size. If I need to digitise paper A3 plans, I want to be able to scan in A3 as well as print. Around 20% of consumers prioritise this scanning requirement.
Ink usage Check which ink is compatible with the model, and don’t assume stated yields will match your own A3 printing needs. If I print regularly, I want to know which ink I can use and how it suits my needs. Around 13% of consumers prioritise ongoing ink costs.

Common buying mistakes

  • An A3 all-in-one doesn’t necessarily scan in A3

    The maximum scan size may be smaller than the print size. Brother lists A3 printing and A4 scanning for the MFC-J5740DW, while Epson lists A3 scanning for the WorkForce WF-7840DTWF.

    Before buying, check the scan limit for the exact model as well as its maximum print size.

    If you still need to digitise paper A3 plans, you may also need a separate scanning solution.

  • Measuring only with the trays retracted

    The printer’s dimensions don’t show how much clear space you’ll need for paper input, output and operation while printing.

    Measure the workspace needed for the paper path of your chosen model; use the closed dimensions as an initial check.

  • Automatically fitting a drawing to the page when the scale must be accurate

    Autodesk explains that ‘Fit to Paper’ scales the drawing to fit the selected paper. This is not the same as using a precise plot scale.

    Select the intended plot scale in your drawing software and check a test print before using it as a drawing to scale.

    An unsuitable test print or working copy could mean having to print it again.

  • Judging ink costs by the purchase price alone

    Choosing between ink tanks and cartridges depends in part on how much you print. A yield quoted for everyday documents won’t necessarily predict how much ink your A3 plans will use.

    Compare compatible inks on a like-for-like basis and check the conditions for your specific model. HP warns that dynamic security may block cartridges without a new or reused HP chip.

    Remember to budget for ongoing ink costs. The HP OfficeJet Pro 9730e is also subject to cartridge chip requirements, according to HP.

Brands to compare

Canon

The PIXMA TS9550a is an A3 all-in-one, while the PIXMA iX6850 is designed for A3+ printing and has no scanning function.

  • Canon lists the PIXMA TS9550a’s dimensions as 468 × 366 × 193 mm with the trays retracted.
  • Canon describes the PIXMA iX6850 as a print-only model. Its listed dimensions don’t show the full space needed to handle paper.

Epson

The WorkForce WF-7840DTWF is an option if you need to scan in A3. With the EcoTank ET-15000, consider the tank ink and rear paper feed.

  • Epson lists scanning up to A3 for the WorkForce WF-7840DTWF.
  • The EcoTank ET-15000 scans up to A4, according to Epson. A3 paper is fed in from the rear, so you’ll need to allow space for it.

Brother

The MFC-J5740DW combines A3 printing with scanning capabilities up to A4.

  • Brother lists A3 as a supported print size for the MFC-J5740DW.
  • Brother lists A4 as the scan size for this model. Check this difference if you want to digitise paper A3 plans.

HP

The OfficeJet Pro 9730e prints and scans in A3, but cartridge requirements should be part of your decision.

  • HP lists printing and scanning up to A3 for the OfficeJet Pro 9730e.
  • HP warns that dynamic security may block cartridges without a new or reused HP chip.

Joybuy products

Related products coming soon.

Frequently asked questions

How can I stop an architectural drawing from being printed at the wrong scale without realising?

Select the intended paper size and required plot scale in your drawing software, then check a test print. Autodesk distinguishes between a precise plot scale and ‘Fit to Paper’, which adjusts the drawing to fit the selected paper.

Can every A3 all-in-one also scan in A3?

No, it varies by model. Brother lists A3 printing but A4 scanning for the MFC-J5740DW, while Epson lists A3 scanning for the WorkForce WF-7840DTWF. So check the scan size for the exact model.

What should I check when setting up a printer on a small desk?

As well as the printer itself, measure the space needed for paper input and output. Canon lists the PIXMA TS9550a’s dimensions with the trays retracted; the Epson EcoTank ET-15000 feeds A3 paper in from the rear.

What warranty and cooling-off period apply to a purchase in the Netherlands?

For a private purchase, the Dutch Government states that statutory consumer protection applies, with no fixed statutory warranty period. The seller is your point of contact if something is faulty. For online purchases, consumers generally have a statutory 14-day cooling-off period, according to Business.gov.nl. These consumer rules do not automatically apply to business purchases.

Can I recycle my old printer for free when I replace it?

For household appliances bought for private use, the Dutch Government says that when you buy a new, similar appliance, you can return your old one under the ‘old for new’ scheme, including when you buy online. This scheme does not apply to equipment used by businesses.