Student making an A3 board
You want to print text and images on one clear, easy-to-read sheet and mainly need to decide whether A3 or A3+ is big enough.
Start with the size you need: if the board fits on A3 or A3+, you don’t automatically need an A1 plotter. For a single, unbroken A1 board, the printer must support that size with your chosen material. For one school project, getting it printed can be an alternative. If you’ll use the printer regularly, also consider the paper feed, ink and how often you expect to print.
You want to print text and images on one clear, easy-to-read sheet and mainly need to decide whether A3 or A3+ is big enough.
You need one unbroken board larger than A3 and are weighing up an A1-capable printer against getting it printed.
You want to keep using the printer after the school project, so you’re considering the paper feed, replacement ink and how often you expect to print.
First, measure the board you need. Then decide whether buying your own printer makes sense for how you’ll use it after the school project. For a one-off poster, also compare the option of getting it printed.
| What to consider | What should you check? | Who does this matter to? |
|---|---|---|
| Up to A3 or A3+ | Measure the board and check the maximum paper size supported by the exact model. A3 is 297 × 420 mm; according to Canon Netherlands, the Canon PIXMA iX6850 supports A3+ up to 329 × 483 mm. | If I want my design to fit on one A3 or A3+ sheet, the size needs to work without making the text or images too small to read. Around 25% of consumers prioritise an A3 or A3+ fit. |
| One large sheet | Check A1 support, the supported width and whether the model uses single sheets or a roll. An A1 poster measures 594 × 841 mm; HP lists A1 support and rolls up to 610 mm for the 2025 edition of the DesignJet T230. | If my group needs one unbroken board larger than A3, I want to know whether the design will fit on a single sheet. Around 25% of consumers say this large format is their main consideration. |
| One-off project | Check the file requirements, current turnaround times and available sizes with a print service before settling on a school deadline. For A1 posters, Print&Bind prefers a PDF and recommends a text margin of at least 5 mm. | If I only need a poster for this project, I want to know whether getting it printed will work with my deadline and file. Around 25% of consumers mainly want a one-off poster without buying a printer for future use. |
| Regular printing | Check whether the model uses cartridges or a refillable ink tank, and which replacement ink is compatible. Also consider how often you’ll use it: according to the Consumentenbond, inkjet ink can dry out and printhead nozzles can become blocked. | If I’ll keep printing after the school project, I want the ink system and maintenance to suit how often I use the printer. Around 25% of consumers prioritise regular use and ink requirements. |
A3+ is smaller than an A1 poster. According to Canon Netherlands, the Canon PIXMA iX6850 supports A3+ up to 329 × 483 mm; an A1 poster measures 594 × 841 mm according to the dimensions given by Print&Bind.
First, confirm the size you need. Then check the maximum print size supported by the specific model.
A print service is an alternative that means you don’t need to use your own printer. If you’re buying a printer for regular use, you’ll also need to consider paper, replacement ink and maintenance.
For your project, compare the practical turnaround times and file requirements for getting it printed with how you expect to use a printer after school.
If you buy your own printer, remember to factor in the cost of paper, replacement ink and maintenance.
According to Canon Netherlands, the Canon PIXMA iX6850 prints up to A3+, but it has no scanning function. Brother specifies scanning and copying up to A3 for the MFC-J6760DW.
If you also need to scan an original A3 sheet, check the print, scan and copy sizes separately.
Without a suitable scanning function, you may need a separate scanning or copying service for an original A3 sheet.
Canon has models for different sizes: the PIXMA iX6850 prints up to A3+, while the imagePROGRAF TC-21 is a separate 24-inch large-format printer.
According to HP, the 2025 edition of the DesignJet T230 is a 24-inch model with A1 support, for anyone wanting to print a larger sheet.
According to Brother, the MFC-J6760DW is an A3 all-in-one for anyone who wants to scan or copy as well as print.
Epson offers the A3+ EcoTank ET-16150 ink tank printer and the separate 24-inch SureColor SC-T2100.
Not on the basis of A3+ support alone: Canon specifies a maximum of A3+ (329 × 483 mm) for the PIXMA iX6850, while an A1 poster measures 594 × 841 mm. For a single A1 sheet, choose a model that supports A1 with your chosen material, or get the board printed.
Follow the requirements of the print service you choose. For A1 posters, Print&Bind prefers a PDF and recommends a margin of at least 5 mm for text. These are that provider’s requirements and recommendations, not universal printer rules.
According to the Consumentenbond, ink can dry out and printhead nozzles can become blocked; automatic cleaning then uses ink. Think about how often you expect to print after the school project.
No. When you buy as a consumer, the seller must offer a solution if the product is faulty. According to the Dutch government, the Netherlands has no fixed statutory warranty period; what you’re entitled to expect depends on the product and the circumstances.
According to Ondernemersplein, businesses that place electrical or electronic equipment on the market or trade in it must meet the applicable European requirements. The manufacturer must also draw up and sign an EU declaration of conformity. The requirements that apply depend on the relevant product regulations.