Who is this choice relevant to?

Teacher using A0 patterns

Wants to print large PDF patterns at full size during lessons, ideally without having to tape sheets together.

Teacher with limited space

Needs to fit the printer, paper feed and printouts into a small classroom, and may be able to use a different printing method.

Print budget manager

Weighs the cost of buying and running a printer against the number of patterns to be printed and the option of using a print service.

What should you look for?

Start with the largest pattern you want to print at full size. Then weigh up the space required and your expected print volume against the option of using a print service.

What to consider What should you check? Who is this important for?
Full-size A0 printing Check whether the paper path can accommodate the pattern’s shorter side, and print at 100%. HP lists A0 as 841 × 1.189 mm. If I want to use A0 patterns on a single sheet, I focus on the paper width and print scale. Around 31% of consumers prioritise printing A0 without taping sheets together.
Space for the printer and paper Measure the space available, allowing for access to the paper feed and room for the printouts—not just the printer itself. In a small classroom, I also need room to load paper and collect printouts. Around 25% of consumers are most concerned about limited classroom space.
Printing in-house or using a print service Compare your expected print volume with the cost of paper, ink and maintenance. If using a print service, factor in the full order and timing. If I only need large patterns now and then, I want to weigh up the overall approach against the space needed for my own printer. Around 25% of consumers compare owning a printer with using a print service.
Printing workflow during lessons Check compatibility with the classroom computer, print a test page and measure the test square if the pattern includes one. If I want a lesson to run smoothly without unexpected scaling or layer issues, I check the PDF and settings in advance. Around 19% of consumers prioritise a predictable classroom printing workflow.

Common pitfalls

  • Assuming ‘wide format’ means ‘A0 on a single sheet’

    The 24-inch HP DesignJet T230 reviewed here supports rolls up to 610 mm wide, while the shorter side of A0 is 841 mm. This means an A0 pattern will not fit on a single sheet at full size.

    Compare the paper width with the size of your own PDF, rather than relying on the printer’s category label.

    Incorrect scaling may mean you have to print the pattern again.

  • Comparing only the printer price with the cost of one outsourced print

    The right choice depends on how many patterns you print; the cost of a one-off order does not give you the full picture for regular use.

    Compare the total costs for the same expected print volume, and factor in the time needed to arrange each option.

  • Assuming any ink cartridge will work

    HP says that security measures may block cartridges containing a non-HP chip in the DesignJet models reviewed here.

    Read the cartridge policy for the exact model and check which consumables are compatible.

    This may limit your choice of replacement cartridges.

Brands to consider

HP

The DesignJet models reviewed include the 24-inch T230 and the 36-inch T650, designed for different print sizes.

  • HP lists roll feeding and A0 support for the T650; the T230 supports roll widths up to 610 mm.
  • HP notes restrictions on cartridges with non-HP chips for the models reviewed. Check the policy for the exact model.

Canon

The imagePROGRAF models reviewed include the compact TC-21 and the 36-inch TM-340.

  • Canon specifies dimensions of 968 × 533 × 245 mm for the TC-21 and describes the TM-340 as a 36-inch printer.
  • Canon’s stated line accuracy depends on user adjustments, the print environment and the media used; it is not a measured result for pattern printing.

Epson

The SureColor SC-T5100 reviewed here, with stand, is a 36-inch model designed for large pattern files.

  • Epson lists support for rolls and cut sheets up to A0, as well as wireless printing.
  • Check that the exact model suits the PDF and computer workflow in your classroom.

Joybuy products

Related products coming soon.

Frequently asked questions

Can a 24-inch printer print an A0 sewing pattern on a single sheet at full size?

Not with the HP DesignJet T230 reviewed here: HP lists a maximum roll width of 610 mm, while the shorter side of A0 is 841 mm. To print A0 on a single sheet, use a printer with sufficient paper width or have the file printed by a service. If printing on smaller sheets, make sure the scale is preserved.

How can I stop a pattern printing at the wrong scale?

Use the correct PDF version, select ‘actual size’ or 100%, and measure the test square first if the pattern includes one. If the PDF has layers, also check which sizes and seam allowances are visible.

When is it practical to use a print service for sewing patterns?

Using a print service may suit you if you only need large patterns occasionally or do not have room for an A0 printer. Repro-Plotservice.nl lists A0 printing and ‘File 1:1 (do not scale)’. Allow time for ordering and delivery, and check the total cost of the order.

What returns and warranty rules apply if I buy a printer for a classroom?

This depends in part on whether you are buying privately as a consumer or on behalf of a business. Business.gov.nl explains that consumer rules do not apply in the same way to business purchases. Check the terms that apply to your type of purchase and the specific seller.

Which compliance documents should I check for a printer?

For electrical and electronic equipment subject to the relevant requirements, Business.gov.nl lists the CE marking and an EU declaration of conformity, among other things. Check the documents for the exact model before making a purchase.