Who is this choice relevant to?

Editor working with mixed village footage

You’re combining locally supplied footage and want to assess differences in colour and brightness before delivering the film. Blackmagic Design describes matching footage from different sources as part of a colour workflow.

Creator of colour-critical versions

You regularly review new versions and want to check and maintain your colour settings, rather than relying solely on the factory specification. EIZO describes hardware calibration for the ColorEdge CS2740.

Laptop editor

You’re looking for a practical 4K workstation and may want to handle both video and laptop charging through a single connection. BenQ, ASUS and Dell specify different USB-C or Thunderbolt connections and power outputs; what’s sufficient depends on your laptop.

What should you look for in a 4K monitor?

Start with your intended delivery format and colour mode. Then compare calibration options and workspace, and check that the connection is compatible with your computer.

What to consider What to look for Who it matters to
Colour for your delivery format Decide whether you’re delivering SDR or HDR, and check that the colour mode suits your workflow. If I’m delivering the film in SDR, I want a colour mode that’s suited to it; a wide colour gamut alone isn’t a substitute for that. Around 29% of consumers prioritise colour reproduction for their delivery format.
Matching footage from different sources Review representative clips and tailor your assessment workflow to the characteristics of your source material. When working with footage from different sources, I want to assess clips side by side without expecting the monitor to correct the differences for me. Around 23% of consumers prioritise matching footage from different sources.
4K detail and editing workspace Compare screen size, resolution and adjustability, and consider how much desk space you have. I want to see both the footage and the editing timeline at once, while taking the space available on my desk into account. Around 18% of consumers prioritise 4K detail and workspace.
Connecting to your computer Check video output over USB-C, the power output required and whether the cable supports the connection. For a laptop setup, I want to know whether a single connection can provide both a video signal and enough power. Around 18% of consumers prioritise connectivity to their editing computer.
HDR assessment Establish whether HDR is actually part of your delivery; an HDR label alone doesn’t prove a monitor is suitable as a reference display. If I’m actually delivering HDR, I want to assess the display as part of that workflow; an HDR logo alone isn’t enough. Around 12% of consumers prioritise HDR assessment.

Things to check before you buy

  • Assuming an HDR logo guarantees accurate HDR assessment

    An HDR label alone doesn’t tell you whether a monitor is suitable for the HDR assessment required by your output. First establish whether you’re actually delivering the film in HDR, then look at the relevant features and workflow.

    For an SDR project, don’t buy based solely on an HDR label.

  • Assuming every USB-C monitor can provide enough power for a laptop

    The stated power output varies by model. EIZO specifies up to 60 W over USB-C for the CS2740; BenQ quotes 90 W for the PD2706U.

    Check your laptop’s video output, how much power it needs and whether the cable supplied with the version you’re considering is suitable.

    If the monitor can’t supply enough power to your laptop, you may still need a separate laptop charger or another connection.

  • Relying on a connection specification for a different variant

    For the LG 27UP850K-W.AEU, Joybuy states a maximum USB-C power output of 96 W, while LG Italia lists 90 W for that .AEU variant. So the details of the version on offer could affect your choice of laptop.

    Compare the full model code and check any crucial connection specifications for the version you’re buying.

Brands to consider

BenQ

The Creative Pro PD2706U is a 27-inch 4K IPS monitor with a Rec.709 mode specified by BenQ and 90 W USB-C power delivery.

  • BenQ lists a factory calibration report and an average Delta E of 3 or less for the PD2706U. These are manufacturer specifications for this model, not measurements of the individual unit you buy.
  • Check that the monitor’s USB-C features work with your computer and that its stated power output is sufficient.

EIZO

The ColorEdge CS2740 is a 26.9-inch 4K display with features for a hardware-calibrated colour workflow.

  • EIZO specifies hardware calibration and a 16-bit LUT for this model.
  • EIZO specifies USB-C power delivery of up to 60 W. Calibration also requires a suitable workflow, so check that the power output is right for your laptop.

ASUS

The ProArt PA279CRV is a 27-inch 4K IPS model; the ROG Swift OLED PG32UCDM Gen3 is a separate, HDR-focused 4K QD-OLED option.

  • ASUS lists factory calibration, 99% DCI-P3 and 96 W USB-C power delivery for the PA279CRV. These specifications apply to this model.
  • ASUS describes features on the ROG Swift OLED PG32UCDM Gen3 that are designed to reduce the risk of burn-in; this doesn’t mean the risk is eliminated.

Dell

The UltraSharp U2725QE is a 27-inch 4K hub monitor with IPS Black and Thunderbolt connections.

  • Dell specifies a 3000:1 contrast ratio and a 120 Hz refresh rate for this model.
  • These features alone don’t tell you whether the colour workflow is right for your film and delivery format.

LG

The UltraFine 27UP850K-W is a 27-inch 4K IPS monitor with USB-C and an adjustable stand.

  • LG lists 95% DCI-P3 as a typical value and DisplayHDR 400 for this model.
  • The DisplayHDR 400 label doesn’t prove the display is suitable as an HDR reference monitor; assess this separately for your workflow.

4K monitors at Joybuy

This selection includes 4K monitors for video editing, with both IPS models and HDR-focused OLED options. Compare colour modes, connections and any limitations against your delivery format and computer.

LG UltraFine 27U711B-B 27-inch 4K IPS monitor

LG UltraFine 27U711B-B 27-inch 4K IPS monitor

A 27-inch 4K IPS model for anyone looking for this screen size for editing and reviewing footage.

The product information lists 3840 × 2160 pixels and HDR10; the HDR label alone doesn’t determine whether the display is suitable for an HDR assessment workflow.

View at Joybuy
MSI MAG 322UP QD-OLED E16 31.5-inch 4K UHD monitor

MSI MAG 322UP QD-OLED E16 31.5-inch 4K UHD monitor

This QD-OLED model could suit an editing workflow where you also want to assess HDR footage; check your delivery requirements before making HDR a deciding factor.

The description lists 3840 × 2160, 99% DCI-P3 and DisplayHDR True Black 400. USB-C supports DisplayPort Alt Mode, but delivers up to 15 W, which won’t replace a separate laptop charger for most laptops.

The description advises avoiding prolonged display of static images at high brightness and using OLED care features to reduce image retention.

View at Joybuy
Dell UltraSharp U3226Q 32-inch 4K UHD 120Hz QD-OLED monitor

Dell UltraSharp U3226Q 32-inch 4K UHD 120Hz QD-OLED monitor

A 32-inch QD-OLED model to consider if, alongside 4K detail, you also need the listed colour management and connectivity features.

Dell lists 4K UHD and 120 Hz; the product description mentions an integrated colourimeter, scheduled automatic calibration and two Thunderbolt 4 connections with up to 140 W laptop power delivery. Check that the features and power output suit your computer and workflow.

View at Joybuy
CRUA CR320QB 32-inch curved 4K monitor

CRUA CR320QB 32-inch curved 4K monitor

An option to consider if you’re looking for a 32-inch curved VA display; check that its stated colour coverage suits your colour workflow.

The product name lists a resolution of 3840 × 2160, 3000R curvature, HDR10 and 100% sRGB. The sRGB figure alone doesn’t prove that it’s suitable for colour-critical assessment.

View at Joybuy
Philips 27E1N1800AE/00 27-inch 4K UHD IPS monitor

Philips 27E1N1800AE/00 27-inch 4K UHD IPS monitor

A 27-inch IPS model for anyone looking for a 4K display with an adjustable stand for an editing workstation.

Philips lists 3840 × 2160 pixels, 60 Hz, HDMI and DisplayPort connections, and a height-adjustable stand. Check which connection is right for your computer.

View at Joybuy

Frequently asked questions

Should you focus on DCI-P3 or Rec.709 for this film?

First establish the characteristics of your source footage and your intended delivery format. For an SDR version mastered to Rec.709, a suitable Rec.709 setting is directly relevant; a higher stated P3 coverage doesn’t remove the need for it. Assess your HDR workflow separately if you’re delivering an HDR version.

How do you connect a laptop with a single cable?

Check whether your laptop’s USB-C port can output video and how much power the laptop needs. BenQ specifies USB-C with DisplayPort Alt Mode and 90 W Power Delivery for the PD2706U. Also check that the cable supplied with the version you’re buying supports the connection.

Is factory calibration enough for regular colour work?

A factory specification describes the model as supplied; for regular checks, calibration options and the workflow required are also important. EIZO specifies hardware calibration for settings including brightness, white point and gamma/EOTF on the CS2740.

What are your rights in the Netherlands if your monitor is faulty?

When you buy as a consumer, you’re entitled to a product that meets the required standard. According to the Dutch Government, there’s no fixed statutory warranty period in the Netherlands; if a product is faulty, the seller must provide a solution. A manufacturer’s warranty or an additional warranty is extra and doesn’t replace your statutory rights.

Can you return a monitor bought online?

For many standard online purchases from a business, you have a 14-day cooling-off period. The Dutch Government lists some exceptions, so check the terms that apply to your purchase and seller.